Hello,
I have a strange problem with FreeNAS 0.7.2 Sabanda (revision 8191):
After enabling LAGG with LACP, I have corrent configuration on Cisco switch, and switch reports that EtherChannel is OK.
ifconfig lagg0 shows MAC address with zeroes only.
Line in rc.conf is:
ifconfig_lagg0="inet 10.0.0.16/24 polling laggproto lacp laggport bce2 lagg port bce3"
After running ifconfig lagg0 laggproto lacp laggport bce2 lagg port bce3 inet 10.0.0.16 netmask 255.255.255.0 interface lagg0 will get proper MAC address from interface and it will have IP address.
(only order of subcommands for ifconfig is changed).
Changing rc.conf will not help as it will be rewritten automatically.
Upgrade is not an option.
Any idea how to solve this?
Best regards,
Haris
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
LAGG with LACP, BSD issue?
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: LAGG with LACP, BSD issue?
Is an old issue on FreeNas build.
please upgrade to latest Nas4Free and test again.
please upgrade to latest Nas4Free and test again.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
hbeslija
- NewUser
- Posts: 2
- Joined: 08 Aug 2014 15:18
- Status: Offline
Re: LAGG with LACP, BSD issue?
Tnx for quick reply.
Best regards,
Haris
Best regards,
Haris