This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

USB 8 Bay Enclosure Compatibility

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
User avatar
guillaumesoucy
NewUser
NewUser
Posts: 5
Joined: 10 Aug 2014 21:43
Location: L'Orignal, Ontario, Canada
Contact:
Status: Offline

USB 8 Bay Enclosure Compatibility

Post by guillaumesoucy »

Hi,

Can I use USB 8 bay enclosure with NAS4Free?


Thanks!

Guillaume

User avatar
apollo567
Site Admin
Site Admin
Posts: 675
Joined: 23 Jun 2012 06:37
Location: Ludwigshafen, Germany
Status: Offline

Re: USB 8 Bay Enclosure Compatibility

Post by apollo567 »

USB-disks and FreeBSD/Nas4free is not a got idea !
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04

User avatar
crowi
Forum Moderator
Forum Moderator
Posts: 1176
Joined: 21 Feb 2013 16:18
Location: Munich, Germany
Status: Offline

Re: USB 8 Bay Enclosure Compatibility

Post by crowi »

you can use enclosures which support eSATA
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded

Post Reply

Return to “Hard disk & controller”