When itry to compile i get problems on ports.
Kernel compile is ok, but on ports i get "is marked as broken: Not staged..
" on every port.
THX Alex
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Compiling Nas4free
-
jasch
- experienced User
- Posts: 136
- Joined: 25 Jun 2012 10:25
- Location: Germany
- Status: Offline
Compiling Nas4free
XigmaNAS 12.0.0.4 (6625)@PROXMOX 5.V - Supermicro X8DTH-6F | 2x Xeon L5640 | 96GB ECC | LSI 9210-8i|LSI 9500-8e|LSI 9201-16i | 40GBe IB Mellanox |
-
zoon01
- Developer
- Posts: 724
- Joined: 20 Jun 2012 21:06
- Location: Netherlands
- Contact:
- Status: Offline
Re: Compiling Nas4free
Remove no stage from the make files in Ports will fix that mesagge.
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz
Development system is same system in virtualbox.
Development system is same system in virtualbox.