Problems to install/upgrade latest version 64-bit

[lindsay]

When i insert the CD i only comes to CD Loader 1.2
Checking boot loader arguments / and there it really stuck and do not continue

[raulfg3]

Post more info about your hardware and a photo of the exact point of STOP.

Photos of your BIOS conf are welcome too.

normally is a CD-ROM that don't like to BSD ( Boot process is BSD related not Nas4Free related), Try to change connection ( IDE to SATA or viceversa), try to change Brand of CD-Reader too.

try AHCI in bios and enable /disable ACPI.

[raulfg3]

If all fails , you still have a special compiled version of Nas4Fre that can be instaled from USB ( You need 2 USB one for install and one to install).

see : viewtopic.php?f=55&t=19

[lindsay]

Found the problem

[raulfg3]

Please tell us to help others to avoid same problem.

[lindsay]

I removed my eSATA controller and SATA controller just in case.
The SATA controller is just to add more SATA discs.

My goal is to have nas4free and another NAS with virtualbox just to have ext4 and zfs in one box

The CPU is a amd 6-core with 8GB ram

In the future i maybe split them and install on another with 4-core AMD with 8GB ram

[raulfg3]

perhaps you must have a look at OpenMediaVault: http://openmediavault.org/

You can use ext4 and ZFS: http://sourceforge.net/apps/phpbb/openm ... f=16&t=314

[lindsay]

perhaps you must have a look at OpenMediaVault: http://openmediavault.org/

You can use ext4 and ZFS: http://sourceforge.net/apps/phpbb/openm ... f=16&t=314

It`s what i use but i did not write it and because i am more familar with debian