My NAS4Free server crashed when the power in my house tripped out and the shared drive now shows as empty. Neither can I log on to the server using the web interface.
The server does run up but displays an error message warning about no such file or directory in /etc/rc.d.php/postinit on line 14 followed by a fatal error filed opening required 'config.inc' (include path :/usr/local/share pear) in /etc/rc/d/php/postinit on line ?1 when preparing web-based file-management.
Is there any way to recover my system and files?
Andy
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Data loss after power failure
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Data loss after power failure
let me guess. you did a full install when you should have done an embedded install.
see if you can recover your config using this
viewtopic.php?f=55&t=6922
and restore the config on an embedded install.
see if you can recover your config using this
viewtopic.php?f=55&t=6922
and restore the config on an embedded install.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.