Hi .. I finally got an M1015 controller ehich I flashed to IT mode to hook up more drives. It's then I noticed one thing - it shows up HDD's as da0, da1 .. instead of the ada0,1,2 of my mobo. the difference here is that they are not showing up the model number or serial number contrary to my motherboard sata conns - which would make it extremely tough for me to identify the hdd's & makes me wonder how zfs would identify the disks and even do any smart control functions.
I'm using Nas4Free 9.0.0.1 - Sandstorm (revision 148), DualCore E2160, 6GB ECC RAM
Its my first time with an M1015.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
M1015 IT behaves differently
-
renjithc
- Starter
- Posts: 33
- Joined: 30 Jun 2012 07:35
- Status: Offline
M1015 IT behaves differently
ProdnNAS: Norco 4224 Chasis, Supermicro X8SiL-F Mobo, Xeon X3430, 2xM1015, 1xSil3112, 32GB (4x8GB) ECC RDIMM, 8x3TB WD Red/Purple Mix RAIDZ2 (16TB Usable), (5x3TB+3x4TB) WD Purple RAIDZ2(16TB Usable), 3x3TB WD Green RAIDZ, 700W Antec PSU, 6xV80E Nidec Screamers@6000rpm, NAS4Free 9.2.0.1 - Shigawire (r972)
-
apollo567
- Site Admin
- Posts: 675
- Joined: 23 Jun 2012 06:37
- Location: Ludwigshafen, Germany
- Status: Offline
Re: M1015 IT behaves differently
Well, save your config and try it with version 972 and report the differences please
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04
-
renjithc
- Starter
- Posts: 33
- Joined: 30 Jun 2012 07:35
- Status: Offline
Re: M1015 IT behaves differently
thnx apollo .. tested with 972 & that resolved the issue. Will be porting everything to 972 shortly.
ProdnNAS: Norco 4224 Chasis, Supermicro X8SiL-F Mobo, Xeon X3430, 2xM1015, 1xSil3112, 32GB (4x8GB) ECC RDIMM, 8x3TB WD Red/Purple Mix RAIDZ2 (16TB Usable), (5x3TB+3x4TB) WD Purple RAIDZ2(16TB Usable), 3x3TB WD Green RAIDZ, 700W Antec PSU, 6xV80E Nidec Screamers@6000rpm, NAS4Free 9.2.0.1 - Shigawire (r972)