Problems to install/upgrade latest version

[ncdeer]

NAS项目组：
你们好！
我在安装NAS4Free时，遇到以下问题：，不管32位，还是64位，都会卡在这里

2012-07-28_21-58-49_2_成都市 copy.jpg

，64位时，是elf64 _loadimage read failed。我的BIOS：

2012-07-28_22-06-20_540_成都市 copy.jpg

其它信息在最后

NAS admin
Hello!
I try to install NAS4Free-x86-LiveCD-9.0.0.1.148 and NAS4Free-x64-LiveCD-9.0.0.1.148,but will failed at here(look photo),32bit ,64bit,same error.other infomation

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 2

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1

Timers
-------------------------------------------------------------------------

ACPI timer 3.580 MHz
Perf timer 2793.050 MHz
Sys timer 1.000 KHz


Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium D 915
Codename Presler
Specification Intel(R) Pentium(R) D CPU 2.80GHz
Package (platform ID) Socket 775 LGA (0x2)
CPUID F.6.5
Extended CPUID F.6
Core Stepping D0
Technology 65 nm
Core Speed 2797.1 MHz
Multiplier x FSB 14.0 x 199.8 MHz
Rated Bus speed 799.2 MHz
Stock frequency 2800 MHz
Instructions sets MMX, SSE, SSE2, SSE3, EM64T
L1 Data cache 2 x 16 KBytes, 8-way set associative, 64-byte line size
Trace cache 2 x 12 Kuops, 8-way set associative
L2 cache 2 x 2048 KBytes, 8-way set associative, 64-byte line size
FID/VID Control yes
FID range 14.0x - 14.0x
VID range 1.116 V - 1.324 V



Chipset
-------------------------------------------------------------------------

Northbridge Intel i945G rev. A2
Southbridge Intel 82801GB (ICH7/R) rev. A1
Graphic Interface PCI-Express
PCI-E Link Width x16
PCI-E Max Link Width x16
Memory Type DDR2
Memory Size 4096 MBytes
Channels Dual
Memory Frequency 333.0 MHz (3:5)
CAS# latency (CL) 5.0
RAS# to CAS# delay (tRCD) 5
RAS# Precharge (tRP) 5
Cycle Time (tRAS) 15
Bank Cycle Time (tRC) 21
MCHBAR I/O Base address 0x0FED14000
MCHBAR I/O Size 4096


Memory SPD
-------------------------------------------------------------------------

DIMM # 1
SMBus address 0x50
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Samsung (CE00000000000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number M3 78T5663QZ3-CF7
Serial number 64A8FF02
Manufacturing date Week 24/Year 09
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 4.0-4-4-12-16 @ 266 MHz
JEDEC #2 5.0-5-5-15-20 @ 333 MHz
JEDEC #3 6.0-6-6-18-24 @ 400 MHz

DIMM # 2
SMBus address 0x52
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) Kingston (7F98000000000000)
Size 2048 MBytes
Max bandwidth PC2-6400 (400 MHz)
Part number 99P5316-033.A02LF
Manufacturing date Week 31/Year 08
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP no
XMP no
JEDEC timings table CL-tRCD-tRP-tRAS-tRC @ frequency
JEDEC #1 3.0-3-3-8-12 @ 200 MHz
JEDEC #2 4.0-4-3-10-16 @ 266 MHz
JEDEC #3 5.0-5-5-15-23 @ 400 MHz

DIMM # 1
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00
10 0C 08 70 01 02 00 07 30 45 3D 50 3C 1E 3C 2D 01
20 17 25 05 12 3C 1E 1E 00 06 3C 7F 80 14 1E 00 00
30 00 03 00 00 00 00 00 00 00 00 00 00 00 00 12 E4
40 CE 00 00 00 00 00 00 00 02 4D 33 20 37 38 54 35
50 36 36 33 51 5A 33 2D 43 46 37 20 33 51 09 24 64
60 A8 FF 02 00 54 45 32 36 36 30 34 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 00 63 43 08 56 20 36 66 FE E0 52 35 00 03 04 00
90 00 63 43 08 56 20 36 66 FE E0 52 35 00 14 01 00
A0 00 63 43 08 56 20 36 66 10 00 52 35 01 16 15 00
B0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
C0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
D0 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
E0 45 44 4D FF FF FF FF FF FF FF FF FF FF FF FF FF
F0 01 FF FF FF FF FF FF FF FF FF FF FF FF FF FF 05

DIMM # 2
SPD registers
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F
00 80 08 08 0E 0A 61 40 00 05 25 40 00 82 08 00 00
10 0C 08 38 01 02 00 07 3D 50 50 60 2B 1E 32 25 01
20 15 22 05 12 3C 1E 1E 00 30 39 69 80 18 14 1E 00
30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 12 E5
40 7F 98 00 00 00 00 00 00 05 39 39 50 35 33 31 36
50 2D 30 33 33 2E 41 30 32 4C 46 00 00 00 08 31 00
60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80 AA A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
A0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
B0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
C0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
D0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 97 07 04 02 00 00 00 00 00 00 00 00 00 00 00 00
F0 39 39 50 35 33 31 36 2D 30 33 33 2E 41 30 32 46

[Earendil]

I'm guessing the problem is with the source, the CD you have N4F on or the means by which it works with the system.

1. Googling finds issues similar to yours relating to HDD mode (ACHI, IDE and RAID). In your first photo you show you have a Maxtor 40 GB IDE HDD but no info on the CD/DVD player itself. What CD or DVD did you read N4F from? Is it SATA or IDE and thus is the BIOS set correctly for those, ACHI or IDE, respectively?

2. Try to burn another CD/DVD and try that. Good luck.

[ncdeer]

I'm guessing the problem is with the source, the CD you have N4F on or the means by which it works with the system.

1. Googling finds issues similar to yours relating to HDD mode (ACHI, IDE and RAID). In your first photo you show you have a Maxtor 40 GB IDE HDD but no info on the CD/DVD player itself. What CD or DVD did you read N4F from? Is it SATA or IDE and thus is the BIOS set correctly for those, ACHI or IDE, respectively?

2. Try to burn another CD/DVD and try that. Good luck.

1.I have 2 IDE(one of HDD,one of CD),2 SATA,The first photo be ???(i don't konw how to say) when I press pause,so no info about CD and SATA.I try to change CD/DVD 4 times,one of IDE-CD,one of Pioneer IDE-DVD,one of Samsung IDE-DVD,one of SATA-DVD-RW,but all same error. On another computer,Maxtor 40 GB IDE HDD+IDE convert USB+SATA-DVD-RW,install OK,32bit and 64bit all OK.

2.NAS4Free latest version 32bit and 64bit, all failed.Same failed on FreeNas 8 32bit and 64bit.

No Luck

[ncdeer]

nobody help me ?

[raulfg3]

Try to boot from embeded, You can install embeded on other PC.

Tell us If boot sucesfully from embeded or not.