This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Transmission no funciona

Spanish community

Moderator: MoloMuy

Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Transmission no funciona

Post by samufiscal »

Hola muy buenas tengo una nas creada por mi y instale el transmission, abri el puerto 51413 que es el que me pide, al paracer le meto un torrent y sale justo abajo remaining time unknown.

la version es 9.2.0.1 - Shigawire (revisión 972)
la plataforma utilize liveCD y esta instalado en mi disco duro
la placa es ASRock E35LM1
el procesadsor x64-full en AMD E-240 Processor
sistema operativo FreeBSD 9.2-RELEASE-p4 (kern.osreldate: 902001)
2gb de ram

Code: Select all

Dec 10 21:00:31	samufiscal	kernel: hdac0: CODEC is not responding!
Dec 10 21:00:31	samufiscal	kernel: hdacc0: <Realtek ALC887 HDA CODEC> at cad 0 on hdac0
Dec 10 21:00:31	samufiscal	kernel: hdaa0: <Realtek ALC887 Audio Function Group> at nid 1 on hdacc0
Dec 10 21:00:31	samufiscal	kernel: pcm0: <Realtek ALC887 (Rear Analog 5.1/2.0)> at nid 20,22,21 and 24,26 on hdaa0
Dec 10 21:00:31	samufiscal	kernel: pcm1: <Realtek ALC887 (Front Analog)> at nid 27 and 25 on hdaa0
Dec 10 21:00:31	samufiscal	kernel: pcm2: <Realtek ALC887 (Rear Digital)> at nid 30 on hdaa0
Dec 10 21:00:31	samufiscal	kernel: usbus0: 12Mbps Full Speed USB v1.0
Dec 10 21:00:31	samufiscal	kernel: usbus1: 480Mbps High Speed USB v2.0
Dec 10 21:00:31	samufiscal	kernel: usbus2: 12Mbps Full Speed USB v1.0
Dec 10 21:00:31	samufiscal	kernel: usbus3: 480Mbps High Speed USB v2.0
Dec 10 21:00:31	samufiscal	kernel: usbus4: 12Mbps Full Speed USB v1.0
Dec 10 21:00:31	samufiscal	kernel: usbus5: 12Mbps Full Speed USB v1.0
Dec 10 21:00:31	samufiscal	kernel: usbus6: 480Mbps High Speed USB v2.0
Dec 10 21:00:31	samufiscal	kernel: ugen0.1: <ATI> at usbus0
Dec 10 21:00:31	samufiscal	kernel: uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Dec 10 21:00:31	samufiscal	kernel: ugen1.1: <ATI> at usbus1
Dec 10 21:00:31	samufiscal	kernel: uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
Dec 10 21:00:31	samufiscal	kernel: ugen2.1: <ATI> at usbus2
Dec 10 21:00:31	samufiscal	kernel: uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Dec 10 21:00:31	samufiscal	kernel: ugen3.1: <ATI> at usbus3
Dec 10 21:00:31	samufiscal	kernel: uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Dec 10 21:00:31	samufiscal	kernel: ugen4.1: <ATI> at usbus4
Dec 10 21:00:31	samufiscal	kernel: uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Dec 10 21:00:31	samufiscal	kernel: ugen5.1: <ATI> at usbus5
Dec 10 21:00:31	samufiscal	kernel: uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
Dec 10 21:00:31	samufiscal	kernel: ugen6.1: <ATI> at usbus6
Dec 10 21:00:31	samufiscal	kernel: uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
Dec 10 21:00:31	samufiscal	kernel: uhub4: 2 ports with 2 removable, self powered
Dec 10 21:00:31	samufiscal	kernel: uhub5: 4 ports with 4 removable, self powered
Dec 10 21:00:31	samufiscal	kernel: uhub0: 5 ports with 5 removable, self powered
Dec 10 21:00:31	samufiscal	kernel: uhub2: 5 ports with 5 removable, self powered
Dec 10 21:00:31	samufiscal	kernel: uhub6: 4 ports with 4 removable, self powered
Dec 10 21:00:31	samufiscal	kernel: uhub1: 5 ports with 5 removable, self powered
Dec 10 21:00:31	samufiscal	kernel: uhub3: 5 ports with 5 removable, self powered
Dec 10 21:00:31	samufiscal	kernel: ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
Dec 10 21:00:31	samufiscal	kernel: ada0: <Hitachi HDT721010SLA360 ST6OA31B> ATA-8 SATA 2.x device
Dec 10 21:00:31	samufiscal	kernel: ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
Dec 10 21:00:31	samufiscal	kernel: ada0: Command Queueing enabled
Dec 10 21:00:31	samufiscal	kernel: ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
Dec 10 21:00:31	samufiscal	kernel: ada0: Previously was known as ad4
Dec 10 21:00:31	samufiscal	kernel: Timecounter "TSC" frequency 1500026925 Hz quality 1000
Dec 10 21:00:31	samufiscal	kernel: cd0 at ahcich3 bus 0 scbus3 target 0 lun 0
Dec 10 21:00:31	samufiscal	kernel: cd0: <HL-DT-ST DVDRAM GH20NS15 IL00> Removable CD-ROM SCSI-0 device
Dec 10 21:00:31	samufiscal	kernel: cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
Dec 10 21:00:31	samufiscal	kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present
Dec 10 21:00:31	samufiscal	kernel: Trying to mount root from ufs:/dev/ufsid/54873ba083b4fff5 [rw]...
Dec 10 21:00:41	samufiscal	nmbd[1807]: [2014/12/10 21:00:41.600985, 0] nmbd/nmbd_become_dmb.c:294(become_domain_master_browser_bcast)
Dec 10 21:00:41	samufiscal	nmbd[1807]: become_domain_master_browser_bcast:
Dec 10 21:00:41	samufiscal	nmbd[1807]: Attempting to become domain master browser on workgroup WORKGROUP on subnet 192.168.1.250
Dec 10 21:00:41	samufiscal	nmbd[1807]: [2014/12/10 21:00:41.601606, 0] nmbd/nmbd_become_dmb.c:307(become_domain_master_browser_bcast)
Dec 10 21:00:41	samufiscal	nmbd[1807]: become_domain_master_browser_bcast: querying subnet 192.168.1.250 for domain master browser on workgroup WORKGROUP
Dec 10 21:00:42	samufiscal	lighttpd[1991]: (log.c.164) server started
Dec 10 21:00:43	samufiscal	login: login on ttyv0 as root
Dec 10 21:00:50	samufiscal	nmbd[1807]: [2014/12/10 21:00:50.077514, 0] nmbd/nmbd_become_dmb.c:112(become_domain_master_stage2)
Dec 10 21:00:50	samufiscal	nmbd[1807]: *****
Dec 10 21:00:50	samufiscal	nmbd[1807]:
Dec 10 21:00:50	samufiscal	nmbd[1807]: Samba server SAMUFISCAL is now a domain master browser for workgroup WORKGROUP on subnet 192.168.1.250
Dec 10 21:00:50	samufiscal	nmbd[1807]:
Dec 10 21:00:50	samufiscal	nmbd[1807]: *****
Dec 10 21:01:04	samufiscal	nmbd[1807]: [2014/12/10 21:01:04.217484, 0] nmbd/nmbd_become_lmb.c:397(become_local_master_stage2)
Dec 10 21:01:04	samufiscal	nmbd[1807]: *****
Dec 10 21:01:04	samufiscal	nmbd[1807]:
Dec 10 21:01:04	samufiscal	nmbd[1807]: Samba name server SAMUFISCAL is now a local master browser for workgroup WORKGROUP on subnet 192.168.1.250
Dec 10 21:01:04	samufiscal	nmbd[1807]:
Dec 10 21:01:04	samufiscal	nmbd[1807]: *****
Dec 10 21:01:23	samufiscal	transmission-daemon[1675]: DHT dht.transmissionbt.com:6881: hostname nor servname provided, or not known (tr-dht.c:126)
Dec 10 21:02:06	samufiscal	transmission-daemon[1675]: DHT dht.transmissionbt.com:6881: hostname nor servname provided, or not known (tr-dht.c:126)
Dec 10 21:04:04	samufiscal	last message repeated 3 times
Dec 10 21:04:33	samufiscal	transmission-daemon[1675]: DHT dht.transmissionbt.com:6881: hostname nor servname provided, or not known (tr-dht.c:126)
Dec 10 21:04:46	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 2901
Dec 10 21:04:46	samufiscal	kernel: pid 2901 (php-cgi), uid 0: exited on signal 10
Dec 10 21:05:00	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 2987
Dec 10 21:05:00	samufiscal	kernel: pid 2987 (php-cgi), uid 0: exited on signal 10
Dec 10 21:05:06	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3030
Dec 10 21:05:06	samufiscal	kernel: pid 3030 (php-cgi), uid 0: exited on signal 10
Dec 10 21:05:26	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3159
Dec 10 21:05:26	samufiscal	kernel: pid 3159 (php-cgi), uid 0: exited on signal 10
Dec 10 21:05:51	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3331
Dec 10 21:05:51	samufiscal	kernel: pid 3331 (php-cgi), uid 0: exited on signal 10
Dec 10 21:05:56	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3374
Dec 10 21:05:56	samufiscal	kernel: pid 3374 (php-cgi), uid 0: exited on signal 10
Dec 10 21:07:05	samufiscal	kernel: pid 1675 (transmission-daemon), uid 999: exited on signal 11
Dec 10 21:07:05	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3391
Dec 10 21:07:05	samufiscal	kernel: pid 3391 (php-cgi), uid 0: exited on signal 10
Dec 10 21:07:07	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3392
Dec 10 21:07:07	samufiscal	kernel: pid 3392 (php-cgi), uid 0: exited on signal 10
Dec 10 21:07:09	samufiscal	kernel: pid 3393 (php-cgi), uid 0: exited on signal 11
Dec 10 21:07:10	samufiscal	lighttpd[1991]: (mod_cgi.c.1312) cleaning up CGI: process died with signal 11
Dec 10 21:07:23	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3433
Dec 10 21:07:23	samufiscal	kernel: pid 3433 (php-cgi), uid 0: exited on signal 11
Dec 10 21:07:26	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3457
Dec 10 21:07:26	samufiscal	kernel: pid 3457 (php-cgi), uid 0: exited on signal 11
Dec 10 21:07:28	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3458
Dec 10 21:07:28	samufiscal	kernel: pid 3458 (php-cgi), uid 0: exited on signal 10
Dec 10 21:09:20	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3551
Dec 10 21:09:20	samufiscal	kernel: pid 3551 (php-cgi), uid 0: exited on signal 11
Dec 10 21:09:26	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3554
Dec 10 21:09:26	samufiscal	kernel: pid 3554 (php-cgi), uid 0: exited on signal 10
Dec 10 21:09:30	samufiscal	lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3558
Dec 10 21:09:30	samufiscal	kernel: pid 3558 (php-cgi), uid 0: exited on signal 11
Last edited by samufiscal on 10 Dec 2014 22:10, edited 1 time in total.
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

viewtopic.php?f=34&t=33

en concreto:

2. Cuando se inicia un nuevo tema se tiene que escribir una descripción que explique con precisión el contenido de lo que se pregunta.
Los Post que incluyen la salida completa de la ficha WebGUI Ayuda> | generador de informes se les dará prioridad sobre los que no lo hacen.
Esta opción está disponible en todas las versiones de NAS4Free.
Cuanta mayor cantidad de información se ofrezca más aumentará la posibilidad de que usted obtenga una respuesta.

Es indispensable publicar:
La versión y/o revisión empleada de NAS4Free, plataforma (Embedded / LiveCD), y la plataforma (x86 , x64).

Es aconsejable indicar:
Información de hardware general (CPU, RAM, modelo de placa base, etc.).
Información de hardware específico (tarjeta de red chipset, chipset del controlador RAID, etc.).
La salida de Dmesg o una copia de registro específico / errores de status.php, si usted está preguntando acerca de un problema general.
La salida de ifconfig si usted está preguntando acerca de una tarjeta de red o un problema de red.
La salida de Pciconf-lv si usted está preguntando por la placa base y / o problemas de tarjeta PCI.
Los fragmentos de código, los registros, archivos de configuración y las citas deben ir entre las etiquetas BBCode apropiado.No es aceptable incluir sólo el hardware y software en tu firma. Su firma se puede cambiar en cualquier momento haciendo el hilo inútil. Recuerde, el objetivo de un foro público es la educación de la comunidad, basándose en firmas que posteriormente se cambian pueden inducir a error a los demás.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

Disculpa las molestias y espero haber modificado el post como es debido.
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

tiene toda la pinta de estar intentando usar un tracker viejo o muerto

Code: Select all

Dec 10 21:04:33   samufiscal   transmission-daemon[1675]: DHT dht.transmissionbt.com:6881: hostname nor servname provided, or not known (tr-dht.c:126)
pero tambien tienes un monton de errores que no deberias tener:

Code: Select all

Dec 10 21:07:07   samufiscal   kernel: pid 3392 (php-cgi), uid 0: exited on signal 10
Dec 10 21:07:09   samufiscal   kernel: pid 3393 (php-cgi), uid 0: exited on signal 11
Dec 10 21:07:10   samufiscal   lighttpd[1991]: (mod_cgi.c.1312) cleaning up CGI: process died with signal 11
Dec 10 21:07:23   samufiscal   lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3433
Dec 10 21:07:23   samufiscal   kernel: pid 3433 (php-cgi), uid 0: exited on signal 11
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

Si aún no tienes nada copiado en el NAS que necesites, mi consejo es que empieces de nuevo, que instales el Nas4Free en una llave USB de calidad ( instala la versión embeded) y arranca desde esa llave USB, activa el servicio Transmission y configura todos los apartados (postea una captura de pantalla de como lo has dejado).

Previamente formatea el disco duro con ZFs o UFS lo que prefieras y usa el disco entero como disco de datos, crea algunas carpetas, entre ellas una para bajarte los torrent y otra para la configuración y los temporales del transmission que luego usaras en la configuración del transmission y deberia funcionarte.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

he intentado instalar en la llave la version embedeb y no me arranca me sale como que va escribir alguna cosa pero no arranca.
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

Que raro, ¿Como has creado la llave???.

Sabes que no es necesario hacerlo en el HP 54L, se puede hacer en tu desktop PC, simplemente te bajas la versión *.img = http://sourceforge.net/projects/nas4fre ... g/download y la copias con el programa win32diskimager que te puedes descargar de: http://sourceforge.net/projects/win32diskimager/

luego solo tienes que configurar la BIOS para que arranque de la llave USB y ya tienes el Nas4Free funcionando y liberados los puerts SATA para meter discos SATa a tutiplen.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

lo que me acabas de decir lo hice antes, acabo de probar con el 64x parity error por que se me corta las palabras con la parte de arriba de la pantalla. utilice el mismo programa.
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

haz una foto y me la envias, ya te digo que mi hermano tiene el HP45L funcionando de esa manera.

¿Has probado a usar otra llave USB?, intenta usar una de 2GB o menos aunque sea antigua a veces el hardware antiguo te sorprende.

¿La has pinchado en el conector USB interno?.

mandame tambien una foto de como has configurado la BIOS (si te detecta la llave USB o no)
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

he probado con los dos usb el nuevo y el antiguo y en diferentes puertos y nada.
me detecta los usbs.
y ahora no me carga ni por disco duro.
http://i59.tinypic.com/rvvojo.jpg
http://i57.tinypic.com/2r3vxba.jpg
http://i61.tinypic.com/zo6hhl.jpg
http://i61.tinypic.com/25gasrt.jpg
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

He vuelto a leer el post entero y no se de donde me he sacado que tenias un HP54L, cuando dices claramente que es una placa ASUS e35lm1

El unico error que veo es el Parity Error, que nunca habia visto.

Prueba con el Memtest que tengas la memoria RAM bien, pues no se me ocurre otro componente que pueda dar ese error: http://www.memtest.org/

Tambien justificaria si tienes la RAM mal los errores del kernel

Code: Select all

ec 10 21:07:07   samufiscal   kernel: pid 3392 (php-cgi), uid 0: exited on signal 10
Dec 10 21:07:09   samufiscal   kernel: pid 3393 (php-cgi), uid 0: exited on signal 11
Dec 10 21:07:10   samufiscal   lighttpd[1991]: (mod_cgi.c.1312) cleaning up CGI: process died with signal 11
Dec 10 21:07:23   samufiscal   lighttpd[1991]: (mod_cgi.c.601) cgi died, pid: 3433
Dec 10 21:07:23   samufiscal   kernel: pid 3433 (php-cgi), uid 0: exited on signal 11
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

voy a echarle un ojo haber.
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

Image
le pasado el programa y no es problema de hardware, me estuve informado y podia ser error de una configuracion de la bios o algo.
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

he pensando en poner el os en un disco duro de 200gb que tengo por hay.
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

Intentalo, deberia funcionarte.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

no me deja me sale esto http://i1133.photobucket.com/albums/m58 ... G_0887.jpg
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
User avatar
raulfg3
Site Admin
Site Admin
Posts: 4865
Joined: 22 Jun 2012 22:13
Location: Madrid (ESPAÑA)
Contact:
Contact raulfg3
Status: Offline

Re: Transmission no funciona

Post by raulfg3 »

ese mensaje es normal, te pide que quites el CD desde el que has realizado la instalación y pulses enter para reiniciar el NAS desde ada0, asegurate que el disco ada0 es el primero en la BIOS para arrancar desde el.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)

Wiki
Last changes

HP T510
Top
User avatar
samufiscal
Starter
Starter
Posts: 32
Joined: 10 Dec 2014 00:41
Status: Offline

Re: Transmission no funciona

Post by samufiscal »

ya esta todo arreglado, el samba y el transmission. nos pusimos un colega y yo hacerlo desde 0. y arreglado. lo unico voy a buscar algun plugin para ver por streamin las peliculas o series que tenga en las nas desde la tele o poniendole algo a la tele
11.2.0.4 embbeded Omnius cpu CPU E5-2603 v3 @ 1.60GHz - Motherboard RAMPAGE V EXTREME- Ram 8gb 2133 - hhd 1 x 1tb - 1 x 3tb (in coming more) gpu 1050ti asus
Top
Post Reply

Return to “Español”