This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Upgrade from 9.2.0.1 - Shigawire (revision 972)

For "upgrading" from FreeNAS/NAS4Free Legacy to XigmaNAS and upgrading XigmaNAS to newer builds.
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
steveshire
NewUser
NewUser
Posts: 4
Joined: 28 May 2013 22:35
Status: Offline

Upgrade from 9.2.0.1 - Shigawire (revision 972)

Post by steveshire »

When trying to upgrade from 9.2.0.1 - Shigawire (revision 972) to NAS4Free-x86-embedded-9.3.0.2.1213.img i just get to 13% uploading then the web page says page not available. I have tried waiting but it doesn't come back and the firmware is not upgraded, anyone any ideas?
Top
User avatar
alexey123
Moderator
Moderator
Posts: 1469
Joined: 19 Aug 2012 08:22
Location: Israel, Karmiel
Contact:
Contact alexey123
Status: Offline

Re: Upgrade from 9.2.0.1 - Shigawire (revision 972)

Post by alexey123 »

Backup config, then use fresh install and restore config
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600
Top
rth
Starter
Starter
Posts: 19
Joined: 21 Dec 2014 17:34
Status: Offline

Re: Upgrade from 9.2.0.1 - Shigawire (revision 972)

Post by rth »

I am also trying to upgrade to NAS4Free-x64-embedded-9.3.0.2.1213.img from Shigawire(972). Using web interface for the upgarde the session just times out immediately when I proceed with the upgrade. Do I need to do a clean install to a spare USB stick and then restore config? Hardware is HP N40L microserver. I have been using Nas4Free for the last 2 years with no problems and a few upgrades.
Top
User avatar
apollo567
Site Admin
Site Admin
Posts: 675
Joined: 23 Jun 2012 06:37
Location: Ludwigshafen, Germany
Status: Offline

Re: Upgrade from 9.2.0.1 - Shigawire (revision 972)

Post by apollo567 »

rth wrote: Do I need to do a clean install to a spare USB stick and then restore config?

YES !
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04
Top
rth
Starter
Starter
Posts: 19
Joined: 21 Dec 2014 17:34
Status: Offline

Re: Upgrade from 9.2.0.1 - Shigawire (revision 972)

Post by rth »

Thanks, spare usb stick ordered. I will try this as soon as it turns up.
Top
rth
Starter
Starter
Posts: 19
Joined: 21 Dec 2014 17:34
Status: Offline

Re: Upgrade from 9.2.0.1 - Shigawire (revision 972)

Post by rth »

All working now on version. Thanks.
Top
User avatar
apollo567
Site Admin
Site Admin
Posts: 675
Joined: 23 Jun 2012 06:37
Location: Ludwigshafen, Germany
Status: Offline

Re: Upgrade from 9.2.0.1 - Shigawire (revision 972)

Post by apollo567 »

Mission accomplished ;-)
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04
Top
Post Reply

Return to “Upgrade XigmaNAS”