Should I be concerned about this? (log attached)

[smish]

Fixed the type 64 error by enabling ZFS ACL but now I'm seeing some weird stuff in the logs I dont really understand. Could someone take a look pretty please?

Running: 9.3.0.2.1283 + smb2

Jan 12 16:05:53 mysystem smbd[2609]: STATUS=daemon 'smbd' finished starting up and ready to serve connections===============================================================
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358259, 0] ../lib/util/fault.c:73(fault_report)
Jan 12 16:05:53 mysystem smbd[2609]: INTERNAL ERROR: Signal 11 in pid 2609 (4.1.14)
Jan 12 16:05:53 mysystem smbd[2609]: Please read the Trouble-Shooting section of the Samba HOWTO
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358365, 0] ../lib/util/fault.c:75(fault_report)
Jan 12 16:05:53 mysystem smbd[2609]: ===============================================================
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358389, 0] ../source3/lib/util.c:785(smb_panic_s3)
Jan 12 16:05:53 mysystem smbd[2609]: PANIC (pid 2609): internal error
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358584, 0] ../source3/lib/util.c:896(log_stack_trace)
Jan 12 16:05:53 mysystem smbd[2609]: BACKTRACE: 4 stack frames:
Jan 12 16:05:53 mysystem smbd[2609]: #0 0x802b6f33d <smb_panic_s3+45> at /usr/local/lib/libsmbconf.so.0
Jan 12 16:05:53 mysystem smbd[2609]: #1 0x801462d4c <smb_panic+60> at /usr/local/lib/libsamba-util.so.0
Jan 12 16:05:53 mysystem smbd[2609]: #2 0x801462f61 <smb_panic+593> at /usr/local/lib/libsamba-util.so.0
Jan 12 16:05:53 mysystem smbd[2609]: #3 0x8041cb236 <pthread_sigmask+918> at /lib/libthr.so.3
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358757, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Jan 12 16:05:53 mysystem smbd[2609]: talloc: access after free error - first free may be at ../source3/lib/substitute.c:614
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358790, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Jan 12 16:05:53 mysystem smbd[2609]: Bad talloc magic value - access after free
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358812, 0] ../source3/lib/util.c:785(smb_panic_s3)
Jan 12 16:05:53 mysystem smbd[2609]: PANIC (pid 2609): Bad talloc magic value - access after free
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.358849, 0] ../source3/lib/util.c:896(log_stack_trace)
Jan 12 16:05:53 mysystem smbd[2609]: BACKTRACE: 3 stack frames:
Jan 12 16:05:53 mysystem smbd[2609]: #0 0x802b6f33d <smb_panic_s3+45> at /usr/local/lib/libsmbconf.so.0
Jan 12 16:05:53 mysystem smbd[2609]: #1 0x801462d4c <smb_panic+60> at /usr/local/lib/libsamba-util.so.0
Jan 12 16:05:53 mysystem smbd[2609]: #2 0x803fb9284 <talloc_strdup+676> at /usr/local/lib/libtalloc.so.2
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.359001, 0] ../source3/lib/dumpcore.c:312(dump_core)
Jan 12 16:05:53 mysystem smbd[2609]: unable to change to %N.core
Jan 12 16:05:53 mysystem smbd[2609]: refusing to dump core
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.359145, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Jan 12 16:05:53 mysystem smbd[2609]: talloc: access after free error - first free may be at ../talloc.c:2550
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.359179, 0] ../source3/lib/popt_common.c:67(popt_s3_talloc_log_fn)
Jan 12 16:05:53 mysystem smbd[2609]: Bad talloc magic value - access after free
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.359199, 0] ../source3/lib/util.c:785(smb_panic_s3)
Jan 12 16:05:53 mysystem smbd[2609]: PANIC (pid 2609): Bad talloc magic value - access after free
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.359534, 0] ../source3/lib/util.c:896(log_stack_trace)
Jan 12 16:05:53 mysystem smbd[2609]: BACKTRACE: 56 stack frames:
Jan 12 16:05:53 mysystem smbd[2609]: #0 0x802b6f33d <smb_panic_s3+45> at /usr/local/lib/libsmbconf.so.0
Jan 12 16:05:53 mysystem smbd[2609]: #1 0x801462d4c <smb_panic+60> at /usr/local/lib/libsamba-util.so.0
Jan 12 16:05:53 mysystem smbd[2609]: #2 0x803fb8f8f <talloc_named+895> at /usr/local/lib/libtalloc.so.2
Jan 12 16:05:53 mysystem smbd[2609]: #3 0x81201cbd0
Jan 12 16:05:53 mysystem smbd[2609]: #4 0x812045200
Jan 12 16:05:53 mysystem smbd[2609]: #5 0x81201b1c0
Jan 12 16:05:53 mysystem smbd[2609]: #6 0x81201cc50
Jan 12 16:05:53 mysystem smbd[2609]: #7 0x812047600
Jan 12 16:05:53 mysystem smbd[2609]: #8 0x812096d40
Jan 12 16:05:53 mysystem smbd[2609]: #9 0x812096800
Jan 12 16:05:53 mysystem smbd[2609]: #10 0x812094740
Jan 12 16:05:53 mysystem smbd[2609]: #11 0x812046a00
Jan 12 16:05:53 mysystem smbd[2609]: #12 0x812046e00
Jan 12 16:05:53 mysystem smbd[2609]: #13 0x8120956c0
Jan 12 16:05:53 mysystem smbd[2609]: #14 0x812046700
Jan 12 16:05:53 mysystem smbd[2609]: #15 0x8120d2160
Jan 12 16:05:53 mysystem smbd[2609]: #16 0x812098300
Jan 12 16:05:53 mysystem smbd[2609]: #17 0x812095840
Jan 12 16:05:53 mysystem smbd[2609]: #18 0x812046b00
Jan 12 16:05:53 mysystem smbd[2609]: #19 0x812046900
Jan 12 16:05:53 mysystem smbd[2609]: #20 0x812046c00
Jan 12 16:05:53 mysystem smbd[2609]: #21 0x8120953c0
Jan 12 16:05:53 mysystem smbd[2609]: #22 0x812095180
Jan 12 16:05:53 mysystem smbd[2609]: #23 0x812046400
Jan 12 16:05:53 mysystem smbd[2609]: #24 0x81201ddd0
Jan 12 16:05:53 mysystem smbd[2609]: #25 0x812021980
Jan 12 16:05:53 mysystem smbd[2609]: #26 0x812024400
Jan 12 16:05:53 mysystem smbd[2609]: #27 0x812045e00
Jan 12 16:05:53 mysystem smbd[2609]: #28 0x812045d00
Jan 12 16:05:53 mysystem smbd[2609]: #29 0x812045c00
Jan 12 16:05:53 mysystem smbd[2609]: #30 0x812045b00
Jan 12 16:05:53 mysystem smbd[2609]: #31 0x812045a00
Jan 12 16:05:53 mysystem smbd[2609]: #32 0x812045900
Jan 12 16:05:53 mysystem smbd[2609]: #33 0x81203cc00
Jan 12 16:05:53 mysystem smbd[2609]: #34 0x812045800
Jan 12 16:05:53 mysystem smbd[2609]: #35 0x81201d3c0
Jan 12 16:05:53 mysystem smbd[2609]: #36 0x812023800
Jan 12 16:05:53 mysystem smbd[2609]: #37 0x812020900
Jan 12 16:05:53 mysystem smbd[2609]: #38 0x81203c900
Jan 12 16:05:53 mysystem smbd[2609]: #39 0x812045600
Jan 12 16:05:53 mysystem smbd[2609]: #40 0x8120209c0
Jan 12 16:05:53 mysystem smbd[2609]: #41 0x81203c600
Jan 12 16:05:53 mysystem smbd[2609]: #42 0x81204a000
Jan 12 16:05:53 mysystem smbd[2609]: #43 0x8120200c0
Jan 12 16:05:53 mysystem smbd[2609]: #44 0x812045500
Jan 12 16:05:53 mysystem smbd[2609]: #45 0x812023400
Jan 12 16:05:53 mysystem smbd[2609]: #46 0x812023380
Jan 12 16:05:53 mysystem smbd[2609]: #47 0x812023300
Jan 12 16:05:53 mysystem smbd[2609]: #48 0x812023280
Jan 12 16:05:53 mysystem smbd[2609]: #49 0x81201ce10
Jan 12 16:05:53 mysystem smbd[2609]: #50 0x812023200
Jan 12 16:05:53 mysystem smbd[2609]: #51 0x812023180
Jan 12 16:05:53 mysystem smbd[2609]: #52 0x812045100
Jan 12 16:05:53 mysystem smbd[2609]: #53 0x812023100
Jan 12 16:05:53 mysystem smbd[2609]: #54 0x81202c100
Jan 12 16:05:53 mysystem smbd[2609]: #55 0x812027140
Jan 12 16:05:53 mysystem smbd[2609]: [2015/01/12 16:05:53.360140, 0] ../source3/lib/dumpcore.c:280(dump_core)
Jan 12 16:05:53 mysystem smbd[2609]: dump_core() called recursive
Jan 12 16:05:53 mysystem smbd[1869]: STATUS=daemon 'smbd' finished starting up and ready to serve connectionsScheduled cleanup of brl and lock database after unclean shutdown
Jan 12 16:41:57 mysystem smbd[2615]: STATUS=daemon 'smbd' finished starting up and ready to serve connectionsie008 (ipv4:192.168.0.26:56718) closed connection to service mysystem_work
Jan 12 16:47:12 mysystem smbd[2605]: STATUS=daemon 'smbd' finished starting up and ready to serve connections===============================================================
Jan 12 16:47:12 mysystem smbd[2605]: [2015/01/12 16:47:12.765073, 0] ../lib/util/fault.c:73(fault_report)
Jan 12 16:47:12 mysystem smbd[2605]: INTERNAL ERROR: Signal 11 in pid 2605 (4.1.14)
Jan 12 16:47:12 mysystem smbd[2605]: Please read the Trouble-Shooting section of the Samba HOWTO
Jan 12 16:47:12 mysystem smbd[2605]: [2015/01/12 16:47:12.765112, 0] ../lib/util/fault.c:75(fault_report)
Jan 12 16:47:12 mysystem smbd[2605]: ===============================================================
Jan 12 16:47:12 mysystem smbd[2605]: [2015/01/12 16:47:12.765132, 0] ../source3/lib/util.c:785(smb_panic_s3)
Jan 12 16:47:12 mysystem smbd[2605]: PANIC (pid 2605): internal error
Jan 12 16:47:12 mysystem smbd[2605]: [2015/01/12 16:47:12.765320, 0] ../source3/lib/util.c:896(log_stack_trace)
Jan 12 16:47:12 mysystem smbd[2605]: BACKTRACE: 4 stack frames:
Jan 12 16:47:12 mysystem smbd[2605]: #0 0x802b6f33d <smb_panic_s3+45> at /usr/local/lib/libsmbconf.so.0
Jan 12 16:47:12 mysystem smbd[2605]: #1 0x801462d4c <smb_panic+60> at /usr/local/lib/libsamba-util.so.0
Jan 12 16:47:12 mysystem smbd[2605]: #2 0x801462f61 <smb_panic+593> at /usr/local/lib/libsamba-util.so.0
Jan 12 16:47:12 mysystem smbd[2605]: #3 0x8041cb236 <pthread_sigmask+918> at /lib/libthr.so.3
Jan 12 16:47:12 mysystem smbd[2605]: [2015/01/12 16:47:12.765460, 0] ../source3/lib/dumpcore.c:312(dump_core)
Jan 12 16:47:12 mysystem smbd[2605]: unable to change to %N.core
Jan 12 16:47:12 mysystem smbd[2605]: refusing to dump core

[smish]

Ok this is now causing problems. Intermittent disconnnects, random slowdowns while browsing the file shares, files will disappear/reappear, timeouts...

Jan 13 10:48:04 mysystem smbd[50937]: refusing to dump core
Jan 13 10:48:04 mysystem smbd[50937]: unable to change to %N.core
Jan 13 10:48:04 mysystem smbd[50937]: [2015/01/13 10:48:04.804764, 0] ../source3/lib/dumpcore.c:312(dump_core)
Jan 13 10:48:04 mysystem smbd[50937]: #3 0x8041cb236 <pthread_sigmask+918> at /lib/libthr.so.3
Jan 13 10:48:04 mysystem smbd[50937]: #2 0x801462f61 <smb_panic+593> at /usr/local/lib/libsamba-util.so.0
Jan 13 10:48:04 mysystem smbd[50937]: #1 0x801462d4c <smb_panic+60> at /usr/local/lib/libsamba-util.so.0
Jan 13 10:48:04 mysystem smbd[50937]: #0 0x802b6f33d <smb_panic_s3+45> at /usr/local/lib/libsmbconf.so.0
Jan 13 10:48:04 mysystem smbd[50937]: BACKTRACE: 4 stack frames:
Jan 13 10:48:04 mysystem smbd[50937]: [2015/01/13 10:48:04.804647, 0] ../source3/lib/util.c:896(log_stack_trace)
Jan 13 10:48:04 mysystem smbd[50937]: PANIC (pid 50937): internal error
Jan 13 10:48:04 mysystem smbd[50937]: [2015/01/13 10:48:04.804501, 0] ../source3/lib/util.c:785(smb_panic_s3)
Jan 13 10:48:04 mysystem smbd[50937]: ===============================================================
Jan 13 10:48:04 mysystem smbd[50937]: [2015/01/13 10:48:04.804482, 0] ../lib/util/fault.c:75(fault_report)
Jan 13 10:48:04 mysystem smbd[50937]: Please read the Trouble-Shooting section of the Samba HOWTO
Jan 13 10:48:04 mysystem smbd[50937]: INTERNAL ERROR: Signal 11 in pid 50937 (4.1.14)
Jan 13 10:48:04 mysystem smbd[50937]: [2015/01/13 10:48:04.804465, 0] ../lib/util/fault.c:73(fault_report)
Jan 13 10:48:04 mysystem smbd[50937]: ===============================================================

[b0ssman]

please run a memtest on your machine

[smish]

please run a memtest on your machine

That is the current plan, just waiting on backups to finish running. Thank you for taking a look good sir.

[smish]

please run a memtest on your machine

memtest came up clean, any ideas?

[smish]

Just reporting in that the fix suggested by onichan here worked:

viewtopic.php?f=21&t=7951