This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

[SOLVED] update of nut to version 2.7.2

Post/Debate your Suggestions & Requests of XigmaNAS here. This ONLY pertains to XigmaNAS.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
goldhonda
NewUser
NewUser
Posts: 12
Joined: 03 Jun 2014 22:57
Status: Offline

[SOLVED] update of nut to version 2.7.2

Post by goldhonda »

Hi Is it possible to update the nut version to the latest one as this handles cheaper badged UPS's and has much newer drivers etc.

Thanks

Chris

User avatar
zoon01
Developer
Developer
Posts: 724
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: update of nut to version 2.7.2

Post by zoon01 »

At rev. 965 NUT port is upgraded to 2.7.2.

All recent builds use NUT 2.7.2.
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

goldhonda
NewUser
NewUser
Posts: 12
Joined: 03 Jun 2014 22:57
Status: Offline

Re: update of nut to version 2.7.2

Post by goldhonda »

My apologies, on my system at least the driver nutdrv_atcl_usb is not in the nut driver folder, looked on 9.3.0.2.1283 64bit embeded and on an older machine running 9.2.0.1.976 again 64bit embeded. Could this be a bug/missed file from the images?

Regards

User avatar
zoon01
Developer
Developer
Posts: 724
Joined: 20 Jun 2012 21:06
Location: Netherlands
Contact:
Status: Offline

Re: update of nut to version 2.7.2

Post by zoon01 »

My apologies, I notice indeed missing driver on install, fixed for next release.

Regards,
zoon01
System specs: XigmaNAS 11.2.0.4 -embedded on Samsung 860 EVO 256GB and Supermicro X10SL7-F w / Bios v3.2, IPMI v.03.86 / CPU E3-1241 v3 @ 3.50GHz - 32GB Crucial DDR3L 1600mhz ECC 1.35v , LSI 2308 on PH20.00.07.00 IT mode, Storage: 5x Western Digital Red (WD30EFRX) raidz

Development system is same system in virtualbox.

goldhonda
NewUser
NewUser
Posts: 12
Joined: 03 Jun 2014 22:57
Status: Offline

Re: update of nut to version 2.7.2

Post by goldhonda »

Excelent. will look forward to that. Thanks

Post Reply

Return to “Suggestions & Requests”