I lost my configuration disk, and now I don't have access to my nas4free. It doesn't even show up on my network after booting the live usb, and it is a dummy computer (no screen or keyboard). But, I do have a configuration backup file downloaded from the nas4free web interface.
For the live USB version, can I copy the configuration file downloaded from nas4free web interface directly to the configuration disk? If so, does it need a specific name/location? Thanks!
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Where is the configuration file located?
-
zinneken
- Starter
- Posts: 57
- Joined: 19 Jul 2013 11:07
- Status: Offline
Where is the configuration file located?
NAS4Free-x64-LiveUSB-9.2.0.1.972
P8H61-M LX R2.0 with onboard Realtek 8111E/8111F, G1610 2.6GHz, 2*4GB RAM Non-ECC CMV4GX3M1A1333C9, ASMedia ASM1061 AHCI
2*2TB WD20EZRX-00DC0B0 RAID1, 1*2TB SAMSUNG HD204UI, 1*2TB WD20EZRX-00DC0B0, 1*1TB SAMSUNG HD103SI, 1*250GB Hitachi HTS545025B9SA02
2* internal USB 2 drives
P8H61-M LX R2.0 with onboard Realtek 8111E/8111F, G1610 2.6GHz, 2*4GB RAM Non-ECC CMV4GX3M1A1333C9, ASMedia ASM1061 AHCI
2*2TB WD20EZRX-00DC0B0 RAID1, 1*2TB SAMSUNG HD204UI, 1*2TB WD20EZRX-00DC0B0, 1*1TB SAMSUNG HD103SI, 1*250GB Hitachi HTS545025B9SA02
2* internal USB 2 drives
-
zinneken
- Starter
- Posts: 57
- Joined: 19 Jul 2013 11:07
- Status: Offline
Re: Where is the configuration file located?
Found it ... disk needs to be DOS formatted and called "HDD", directory needs to be called "conf" and file needs to be called "config.xml".
/HDD/conf/config.xml
See http://wiki.nas4free.org/doku.php?id=do ... ivecd_mode
What the wiki and forum don't mention is that the disk needs to be put in the exact same physical USB location as it was when the backup was taken. Otherwise it doesn't work. Found the exact USB port and it now works again.
/HDD/conf/config.xml
See http://wiki.nas4free.org/doku.php?id=do ... ivecd_mode
What the wiki and forum don't mention is that the disk needs to be put in the exact same physical USB location as it was when the backup was taken. Otherwise it doesn't work. Found the exact USB port and it now works again.
NAS4Free-x64-LiveUSB-9.2.0.1.972
P8H61-M LX R2.0 with onboard Realtek 8111E/8111F, G1610 2.6GHz, 2*4GB RAM Non-ECC CMV4GX3M1A1333C9, ASMedia ASM1061 AHCI
2*2TB WD20EZRX-00DC0B0 RAID1, 1*2TB SAMSUNG HD204UI, 1*2TB WD20EZRX-00DC0B0, 1*1TB SAMSUNG HD103SI, 1*250GB Hitachi HTS545025B9SA02
2* internal USB 2 drives
P8H61-M LX R2.0 with onboard Realtek 8111E/8111F, G1610 2.6GHz, 2*4GB RAM Non-ECC CMV4GX3M1A1333C9, ASMedia ASM1061 AHCI
2*2TB WD20EZRX-00DC0B0 RAID1, 1*2TB SAMSUNG HD204UI, 1*2TB WD20EZRX-00DC0B0, 1*1TB SAMSUNG HD103SI, 1*250GB Hitachi HTS545025B9SA02
2* internal USB 2 drives
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Where is the configuration file located?
well. the easier way would have been to set up a new usb key and from the web interface restore the config.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
sherman
- Starter
- Posts: 41
- Joined: 27 Dec 2014 15:16
- Status: Offline
Re: Where is the configuration file located?
Mh,
i had to delete the Vboxuser group due to some issues from the config.xml. I edited exactly the above named file via WinSCP and reuploaded it. Checked even the new file date on the NAS and rebootet. But, against my hopes old content was restored or still in the file.
So, is there a backup file or other playe where the config.xml ist being loaded?
i had to delete the Vboxuser group due to some issues from the config.xml. I edited exactly the above named file via WinSCP and reuploaded it. Checked even the new file date on the NAS and rebootet. But, against my hopes old content was restored or still in the file.
So, is there a backup file or other playe where the config.xml ist being loaded?