This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!



I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Repeated Issues

CIFS/SMB network sharing.
Forum rules
Set-Up GuideFAQsForum Rules
Post Reply
ZRE
NewUser
NewUser
Posts: 1
Joined: 17 Mar 2015 14:37
Status: Offline

Repeated Issues

Post by ZRE »

We have a NAS4free setup on an old PC, and have a 2TB USB HDD as the root storage. The aux parameters have been added:
idmap config *:backend = tdb
idmap config *:range = 90000000-100000000
which has stopped the occurrence all of the time, but has not solved the issue.

I Get this now:

Mar 17 13:00:56
smbd[2936]: STATUS=daemon 'smbd' finished starting up and ready to serve connectionscreate_connection_session_info failed: NT_STATUS_ACCESS_DENIED
Mar 17 13:01:35
kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 27 35 12 28 00 00 40 00
Mar 17 13:01:35
kernel: (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
Mar 17 13:01:35
kernel: (da0:umass-sim0:0:0:0): Retrying command
Mar 17 13:06:45
kernel: (da0:umass-sim0:0:0:0): WRITE(10). CDB: 2a 00 00 00 01 68 00 00 40 00
Mar 17 13:06:45
kernel: (da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
Mar 17 13:06:45
kernel: (da0:umass-sim0:0:0:0): Retrying command
Mar 17 13:08:39
smbd[2953]: STATUS=daemon 'smbd' finished starting up and ready to serve connectionscreate_connection_session_info failed: NT_STATUS_ACCESS_DENIED

The final line then repeats each second.

The whole thing occurs when a windows machine with authenticated user accesses either r/w the share folder. After a while, the windows machines loose the server and are unable to access the share, although the server is accessible via the web interface. We only have CIFS/SMB active.

Anyone have any suggestions for a work around?

User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Repeated Issues

Post by b0ssman »

usb for storage is not recommended with nas4free.

you cant read the smart values.

i suggest you take the drive out of the usb box and install it directly
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.

Post Reply

Return to “CIFS/SMB (Samba)”