Hi,
I have a new Supermicro motherboard base on the Atom C2750. I'm trying to install NAS4FREE to evaluate (choosing between FreeNAS, NAS4Free or pure FreeBSD based server). My NICs are not detected on NAS4Free as FreeNAS detects them (of course, FreeBSD 10.1 has no problem either).
Can anyone compile em drivers against 9.3 for me? The card ID is 0x1f4114d9 and chip is 0x1f418086 rev 3.
Or is 10.1 based NAS4Free coming out soon (guess this is a developer thread question.....)
Thanks,
tcn
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Intel NIC not detected Nas4FREE 9.3 - Anyone can build a driver?
-
tcn
- NewUser
- Posts: 2
- Joined: 29 Mar 2015 20:42
- Status: Offline
Intel NIC not detected Nas4FREE 9.3 - Anyone can build a driver?
------------------------------------------------
Supermicro A1SAi-2750F, 32GB ECC DDR3, Avago (LSI) 9211-8i-IT, 4 x NAS ST2000VN000
Supermicro A1SAi-2750F, 32GB ECC DDR3, Avago (LSI) 9211-8i-IT, 4 x NAS ST2000VN000
-
apollo567
- Site Admin
- Posts: 675
- Joined: 23 Jun 2012 06:37
- Location: Ludwigshafen, Germany
- Status: Offline
Re: Intel NIC not detected Nas4FREE 9.3 - Anyone can build a driver?
Which NIC is used/available in your system ?
my NAS and its development until today: viewtopic.php?f=63&t=39&sid=039fed830cf ... 4d0abe4a04
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Intel NIC not detected Nas4FREE 9.3 - Anyone can build a driver?
the supermicro c2750 use the intel i354
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
tcn
- NewUser
- Posts: 2
- Joined: 29 Mar 2015 20:42
- Status: Offline
Re: Intel NIC not detected Nas4FREE 9.3 - Anyone can build a driver?
Yes, b0ssman is right, it is the i354.
------------------------------------------------
Supermicro A1SAi-2750F, 32GB ECC DDR3, Avago (LSI) 9211-8i-IT, 4 x NAS ST2000VN000
Supermicro A1SAi-2750F, 32GB ECC DDR3, Avago (LSI) 9211-8i-IT, 4 x NAS ST2000VN000
-
ThomasC
- NewUser
- Posts: 3
- Joined: 12 Feb 2015 02:55
- Status: Offline
Re: Intel NIC not detected Nas4FREE 9.3 - Anyone can build a driver?
Hi, the driver and instructions at the bottom of viewtopic.php?t=7886 worked for my Intel i354 within both 9.3.0.2.1349 and 9.3.0.2.1391.
XigmaNAS 11.2.0.4.6400 Full RootOnZFS , Supermicro A1SRM-2558F , 16GB ECC , pool: 4 x 3TB WD Red NAS 3.5" , root: 1 x 1TB WD Red NAS 2.5"