Hello, when upgrading version 9.2.0.1 (972) using the Firmware Tab under the System heading; I can locate my image file "NAS4Free-x64-embedded-9.3.0.2.1349.img" and the image begins to upload to my NAS server as expected.
However, around 30% into the download, I get a new web page with the message "Entity too large" on it, and the upload aborts.
I am pretty sure the I have plenty of spare ram, but I think that the system SATA flash disk may be too small - it is designated ada0 and is only 512MB.
Is this the problem?
If so - is there any way of avoiding having to change the disk if I want to do upgrades by the firmware method in the future?
Regards,
Jimgi
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Entity too large error - system drive too small?
-
jimgi
- NewUser
- Posts: 2
- Joined: 08 Apr 2015 23:44
- Location: London, England
- Status: Offline
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
Re: Entity too large error - system drive too small?
You cannot upgrade to .1349 from a version below 9.3.0.2.1310
See viewtopic.php?f=78&t=8340
Save your config, use the live usb or live CD version to install the embedded version on a usb stick, at least 4GB capacity, and then restore config.
See viewtopic.php?f=78&t=8340
Save your config, use the live usb or live CD version to install the embedded version on a usb stick, at least 4GB capacity, and then restore config.
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
-
jimgi
- NewUser
- Posts: 2
- Joined: 08 Apr 2015 23:44
- Location: London, England
- Status: Offline
Re: Entity too large error - system drive too small?
Doh, I saw this at one time, but assumed that wasn't my problem.
Thanks for that! I appreciate the quick response.
Will I be able to revert to the Firmware method for future upgrades after doing this?
Jimgi
Thanks for that! I appreciate the quick response.
Will I be able to revert to the Firmware method for future upgrades after doing this?
Jimgi