So I have to flash another SAS2008 card to IT mode. however I can't find P16 firmware anymore. The oldest from LSI's website is P17.
I know that FreeBSD 9.3 was based on P16 firmware drivers. sooooooooooooooooooooooooooooooo
Can I use P17 or I have to find the P16 firmware? If anyone know where I Can get the P16 that would be great.
TIA
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
9211-8i and all SAS2008 IT mode
-
mbze430
- experienced User
- Posts: 95
- Joined: 20 Nov 2014 05:41
- Status: Offline
9211-8i and all SAS2008 IT mode
NAS #1 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SL7-F w/ 24GB ECC - LSI SAS 9207-16i - 2x RAIDZ1 (10x3TB) Pools and 1x (2x4TB) Stripe Pool
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: 9211-8i and all SAS2008 IT mode
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
mbze430
- experienced User
- Posts: 95
- Joined: 20 Nov 2014 05:41
- Status: Offline
Re: 9211-8i and all SAS2008 IT mode
shit I was looking at the firmware not the bios section, thanks
NAS #1 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SL7-F w/ 24GB ECC - LSI SAS 9207-16i - 2x RAIDZ1 (10x3TB) Pools and 1x (2x4TB) Stripe Pool
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)
NAS #2 - 11.2.0.4 - Omnius (revision 6625) - SuperMicro X10SLM-F w/32GB ECC - LSI SAS 9207-8i (RAID10) - IBM M1015-IT Mode (RAID10)