I want to ask, why firmware upgrade page is not consistent as other system pages .
I refer to the enable / disable button, Why is not in the top like a mark/unmark check button like is in the SMB service for example?.
see screen captures.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Upgrade firmware not consistent whith other services
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Upgrade firmware not consistent whith other services
You do not have the required permissions to view the files attached to this post.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
alexey123
- Moderator
- Posts: 1469
- Joined: 19 Aug 2012 08:22
- Location: Israel, Karmiel
- Contact:
- Status: Offline
Re: Upgrade firmware not consistent whith other services
As for me - all work http://s013.radikal.ru/i324/1507/52/5dab440a69aa.png'
May be you need clear browser cache ?
May be you need clear browser cache ?
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Upgrade firmware not consistent whith other services
no, no, no, you do not understand.
I have no problem, and all works fine.
my point is: why is not enable / disable firmware button like disable / enable SAMBA service ? <- to maintaint a coherent look
I have no problem, and all works fine.
my point is: why is not enable / disable firmware button like disable / enable SAMBA service ? <- to maintaint a coherent look
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
Re: Upgrade firmware not consistent whith other services
On the other hand all others need to hit on apply for them actually to work..
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
-
daoyama
- Developer
- Posts: 394
- Joined: 25 Aug 2012 09:28
- Location: Japan
- Status: Offline
Re: Upgrade firmware not consistent whith other services
This is historical reason.
If you enable firmware upload, it creates 512MB of memory disk.
So, you can use only 1.5GB of physical memory if you have only 2GB physical memory.
It's no sense. firmware upgrade is one time operation. You don't need 512MB reservation always.
Recent N4F both 10.x and 9.3 use tmpfs instead of mdmfs.
It's more effective but we don't need it...
If you enable firmware upload, it creates 512MB of memory disk.
So, you can use only 1.5GB of physical memory if you have only 2GB physical memory.
It's no sense. firmware upgrade is one time operation. You don't need 512MB reservation always.
Recent N4F both 10.x and 9.3 use tmpfs instead of mdmfs.
It's more effective but we don't need it...
NAS4Free 10.2.0.2.2115 (x64-embedded), 10.2.0.2.2258 (arm), 10.2.0.2.2258(dom0)
GIGABYTE 5YASV-RH, Celeron E3400 (Dual 2.6GHz), ECC 8GB, Intel ET/CT/82566DM (on-board), ZFS mirror (2TBx2)
ASRock E350M1/USB3, 16GB, Realtek 8111E (on-board), ZFS mirror (2TBx2)
MSI MS-9666, Core i7-860(Quad 2.8GHz/HT), 32GB, Mellanox ConnectX-2 EN/Intel 82578DM (on-board), ZFS mirror (3TBx2+L2ARC/ZIL:SSD128GB)
Develop/test environment:
VirtualBox 512MB VM, ESXi 512MB-8GB VM, Raspberry Pi, Pi2, ODROID-C1
GIGABYTE 5YASV-RH, Celeron E3400 (Dual 2.6GHz), ECC 8GB, Intel ET/CT/82566DM (on-board), ZFS mirror (2TBx2)
ASRock E350M1/USB3, 16GB, Realtek 8111E (on-board), ZFS mirror (2TBx2)
MSI MS-9666, Core i7-860(Quad 2.8GHz/HT), 32GB, Mellanox ConnectX-2 EN/Intel 82578DM (on-board), ZFS mirror (3TBx2+L2ARC/ZIL:SSD128GB)
Develop/test environment:
VirtualBox 512MB VM, ESXi 512MB-8GB VM, Raspberry Pi, Pi2, ODROID-C1
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Upgrade firmware not consistent whith other services
can you please consider to modify webGUI , so firmware upgrade page can be identical to other services pages?.
Thanks.
Thanks.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510