This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
SOLVED [Screen remains black at install] No Network
-
loulougps
- NewUser
- Posts: 5
- Joined: 12 Jun 2015 18:37
- Status: Offline
SOLVED [Screen remains black at install] No Network
Burned the CD, booted the pc on that cd, and all I got is a black screen... Please help!
Last edited by loulougps on 17 Jul 2015 09:02, edited 2 times in total.
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
Re: Screen remains black at install
Some info regarding your system would be nice.
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
-
loulougps
- NewUser
- Posts: 5
- Joined: 12 Jun 2015 18:37
- Status: Offline
Re: [Screen remains black at install] No Network...
Hello,
I changed my display and then I got a picture... but the only network interface is L0 and IP: 127.0.0.1... could it be that the onboard Gygabit is not recognised?
motherboard: ASUS M5A78L-MLX
8Gb RAM DDR3
2x 1Tb seagate barracuda
I changed my display and then I got a picture... but the only network interface is L0 and IP: 127.0.0.1... could it be that the onboard Gygabit is not recognised?
motherboard: ASUS M5A78L-MLX
8Gb RAM DDR3
2x 1Tb seagate barracuda
-
crowi
- Forum Moderator
- Posts: 1176
- Joined: 21 Feb 2013 16:18
- Location: Munich, Germany
- Status: Offline
Re: Screen remains black at install
The Realtek 8111 is supported by FreeBSD, is it enabled in the BIOS?
NAS 1: Milchkuh: Asrock C2550D4I, Intel Avoton C2550 Quad-Core, 16GB DDR3 ECC, 5x3TB WD Red RaidZ1 +60 GB SSD for ZIL/L2ARC, APC-Back UPS 350 CS, NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
NAS 2: Backup: HP N54L, 8 GB ECC RAM, 4x4 TB WD Red, RaidZ1, NAS4Free 11.0.0.4.3460 embedded
NAS 3: Office: HP N54L, 8 GB ECC RAM, 2x3 TB WD Red, ZFS Mirror, APC-Back UPS 350 CS NAS4Free 11.0.0.4.3460 embedded
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
Re: Screen remains black at install
Yes, there must be something like that, because I see that other members are using this motherboard...
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
-
loulougps
- NewUser
- Posts: 5
- Joined: 12 Jun 2015 18:37
- Status: Offline
Re: Screen remains black at install
ok then I will try with an additional LAN card...
-
loulougps
- NewUser
- Posts: 5
- Joined: 12 Jun 2015 18:37
- Status: Offline
Re: [Screen remains black at install] No Network
On board LAN controller is well enabled in the BIOS. Waiting for delivery of a LOGILINK PC0029a. We'll see if it improves... 
-
ChriZathens
- Forum Moderator
- Posts: 758
- Joined: 23 Jun 2012 09:14
- Location: Athens, Greece
- Contact:
- Status: Offline
Re: [Screen remains black at install] No Network
Intel nics are the recommended ones.. Like intel pro/1000 pci-e
That logilink is realtek based
That logilink is realtek based
My Nas
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
- Case: Fractal Design Define R2
- M/B: Supermicro x9scl-f
- CPU: Intel Celeron G1620
- RAM: 16GB DDR3 ECC (2 x Kingston KVR1333D3E9S/8G)
- PSU: Chieftec 850w 80+ modular
- Storage: 8x2TB HDDs in a RaidZ2 array ~ 10.1 TB usable disk space
- O/S: XigmaNAS 11.2.0.4.6625 -amd64 embedded
- Extra H/W: Dell Perc H310 SAS controller, crosflashed to LSI 9211-8i IT mode, 8GB Innodisk D150SV SATADOM for O/S
Backup Nas: U-NAS NSC-400, Gigabyte MB10-DS4 (4x4TB Seagate Exos disks in RaidZ configuration - 32GB RAM)
-
loulougps
- NewUser
- Posts: 5
- Joined: 12 Jun 2015 18:37
- Status: Offline
SOLVED Re: [Screen remains black at install] No Network
I installed the LOGILINK PC0029a, restarted the system, and it works "plug and play" ! 