Hi All
quick question, how can I view the separate drives within the hardware raid array and smart info please ?
Adaptec 2820sa Hardware Raid 6 all 8 ports populated
I've used arcconf which gives me the information but in device manager GUI shows only as 1 drive not multiple with no Specific details
thank you
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Adaptec 2820sa Raid Card
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Adaptec 2820sa Raid Card
if you want the smart info you will have to stick with arcconf.
that is why we recommend using an dumb hba rather than a raid controller.
also please read
http://wiki.nas4free.org/doku.php?id=faq:0144
that is why we recommend using an dumb hba rather than a raid controller.
also please read
http://wiki.nas4free.org/doku.php?id=faq:0144
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
vanastasis
- NewUser
- Posts: 5
- Joined: 31 Oct 2014 21:06
- Status: Offline
Re: Adaptec 2820sa Raid Card
thank you