NAS4Free 10.1.0.2.1761 released (FreeBSD 10.1-RELEASE-P17)

[zoon01]

The nas4free team is pleased to announce the immediate release of 10.1.0.2.1761.

http://sourceforge.net/projects/nas4fre ... .0.2.1761/

README & CHANGELOG

NAS4Free Upgrade from below 9.3.0.2.1310 is NOT possible!!!
=====================================================
Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
** ! Tools to write extracted embedded file are not supported ! **
You must use the liveusb/CD for it's first installation!!!.

Install from scratch notes
======================
** Embedded.img.xz is only for upgrades by WEBGUI, do not extract and write to any media! **

Download NAS4Free livecd or liveusb and boot from it.
The compressed LiveUSB.img.gz needs to be extracted before you can write it to usb media,
you can use it with Win32DiskImager or any other tool.
Press 9 for the install menu and perform an embedded installation.

Upgrade note:
=============
You must associate CARP with physical interface explicitly after upgrading to 10.X.
You may need modifying your NFS and AFP share setting.
You may need modifying your ftp setting, no longer SSL is supported (only TLS).
Send Buffer Size/Receive Buffer Size in CIFS/SMB is changed to 128480 since 9.3.0.2.1375.
/var and /var/tmp size has changed.
After the upgrade please do make a new backup of your config System|Backup/Restore.

Extended GUI note!
Don't use current Extended GUI on 10.1.0.2 series yet, disable it first before upgrade.

ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize.

Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 10.1.0.2.1761
=================
Changes:
- Upgrade to FreeBSD 10.1 RELEASE p17.
- Add ability to create ZFS on GPT.
- Add Home, Insert, Delete, End, Page Up/Down, ctrl left/right keys to console.
- Add Daap/Firefly advanced options.
- Add aio_pthread streams_xattr acl_xattr.
- Add zfsacl default setting.
- Add inherit acls on SMB share.
- Add Ukrainian translation to webgui.
- Add encrypt/decrypt password in System|Backup/Restore.
- Add service Samba Active Directory Domain Controller.
- Add custom mount for GPT label and UFS formatted ZFS volume.
- Add portsnap and related commands.
- Add sudo utility.
- Create 4KB(ashift=12) ZFS pool by default.
- Improve software raid info pages with Ajax.
- Increase upload size in Webserver service up to 16GiB. (websrv_maxrequestsize)
- dropp SSL support proftpd. (TLS connections are supported)
- Support aclinherit/aclmode ZFS properties.
- Use SHA-512 crypt password for admin. (WebGUI login and all services)
- Use SHA-512 crypt password File Manager.
- Upgrade mDNSResponder to 567.
- Upgrade msmtp to 1.6.2.
- Upgrade tmux to 2.0.
- Upgrade bash 4.3 to patch 39.
- Upgrade nut to 2.7.3.
- Upgrade jQuery to 1.11.3.
- Upgrade inadyn-mt to 02.24.46.
- Upgrade smartmontools to 6.4.
- Upgrade proftpd to 1.3.5a.
- Upgrade tzdata to 2015e.
- Upgrade samba to 4.2.2.
- Upgrade virtualbox to 4.3.30.
- Upgrade nano to 2.4.2.
- Upgrade istgt to 20150713.
- Upgrade isboot to 0.2.9.
- Upgrade php56 to 5.6.12.

Fixes:
- multiple AFP shares cannot be handled by mdnsresponder.conf.
- segmentation fault on mDNSResponderPosix.
- cannot install to Toshiba drive.
- missing iconv related files.
- don't remove user swap on same location of default swap.
- missing libftdi in lcdproc.
- broken extension menu in filemanager.
- missing translation in OPT/LAN interface.
- AFP share is not shown in Time Machine.
- start service ntpdate.
- show default swap on Diagnostics|Information|Swap.
- advertises CIFS to be running on port 445 instead of 139.
- patch msk (marvell) ethernet driver.

Note:
- iperf2 has been replaced for iperf3 because of inconsistent results for UDP above 2Gbps.
- iperf3 is not backwards compatible with iperf2.x.

Permanent restrictions:
- It is not possible to format a SoftRAID disk with MSDOS FAT16/32.
- It is not possible to encrypt a disk partition, only complete disks are supported.
- AFP shares with TimeMachine support are limited to max. 4 shares.


Regards,
The NAS4Free Team

[antonio7]

Hm... Something went wrong. There is no button to update the NAS. Here is the screenshot:

[kfnas]

Hm... Something went wrong. There is no button to update the NAS. Here is the screenshot:

don't know what went wrong with the gui in your config, but you can do it over cli - shell (ssh) or console

http://wiki.nas4free.org/doku.php?id=do ... mmand_line

use either /tmp or /ftmp if one of them are full

[ernie]

Hello

Did you reboot as request of your screenshot (in bold) ?

Perhaps it can help

[sleid]

You made a change in your configuration that requires a reboot.
First reboot your Nas
Second save your configuration
Thirdly made updating the software

[antonio7]

Hello

Did you reboot as request of your screenshot (in bold) ?

Perhaps it can help

That solved the problem, thank you!