hi
Windows7
Netgear C03100D router
I am trying to setup Plex on my NAS4FREE nasbox. I am failing at the first step of TheBrig setup as i can't fetch the code/file needed to create the jail. I then tried to ping / trace from inside nasbox and it couldn't find www.google.com.
(i can see nasbox across my network without issue)
Having searched, it seems that this could be a related to my DNS configuration? My understanding is that with the Telstra cable i can't use a static IP?
I have setup my ip4v and the gateway as 192.168.0.1 in nasbox.
Are there any specific settings i need to change on the router to enable me to be able to fetch the files?
Even once i do this am i going to be able to use Plex on the nasbox using the Netgear router? I have seen lots of threads which suggest latency issues with this router which don't seem to have been addressed yet?
eg
https://crowdsupport.telstra.com.au/t5/ ... s-specific...
have posted also on telstra site but not much help so far.
thanks
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Can't ping from inside Nas4free so can't setup jail
-
simoncs
- NewUser
- Posts: 8
- Joined: 23 Dec 2014 02:25
- Status: Offline
-
alexey123
- Moderator
- Posts: 1469
- Joined: 19 Aug 2012 08:22
- Location: Israel, Karmiel
- Contact:
- Status: Offline
Re: Can't ping from inside Nas4free so can't setup jail
If you can not ping http://www.google.com from NAS4Free, check DNS setting on page System|General Setup
Home12.1.0.4 - Ingva (revision 7091)/ x64-embedded on AMD A8-7600 Radeon R7 A88XM-PLUS/ 16G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600
Lab 12.1.0.4 - Ingva (revision 7091) /x64-embedded on Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz / H61M-DS2 / 4G RAM / UPS Ippon Back Power Pro 600
-
simoncs
- NewUser
- Posts: 8
- Joined: 23 Dec 2014 02:25
- Status: Offline
Re: Can't ping from inside Nas4free so can't setup jail
thanks - i have just ran another ipconfig - i was using the gateway ip of the router not the DNS server ip. - so i can now ping correctly.
I read another thread that suggested that plex wouldn't work so well on versions below 9.3? I am on x86 v9.2.01 - should i upgrade to v10 first before trying to create the jail? It looks like i need to upgrade from scratch though as you can't upgrade from the gui with v9.2 - is that correct?
in which case i think the steps are..
backup config file
download x64 liveusb v10 (makes sense to go to 64bit version if going to upgrade - my cpu should support it E6750 core 2 duo)
install to new usb
boot from usb
config for webgui
start webgui
restore config file
I read another thread that suggested that plex wouldn't work so well on versions below 9.3? I am on x86 v9.2.01 - should i upgrade to v10 first before trying to create the jail? It looks like i need to upgrade from scratch though as you can't upgrade from the gui with v9.2 - is that correct?
in which case i think the steps are..
backup config file
download x64 liveusb v10 (makes sense to go to 64bit version if going to upgrade - my cpu should support it E6750 core 2 duo)
install to new usb
boot from usb
config for webgui
start webgui
restore config file