NAS4Free 10.2.0.2.1778 released (FreeBSD 10.2-RELEASE)

[b0ssman]

has anyone actually used a powermeter and compared the 2 versions?

[mbze430]

my 2nd request.... again, I am working with people over at Network UPS Tools. They need the ./configure used to compile NUT in NAS4Free to resolve some driver issues. Please help or point me to the right direction where I can obtain this

[noclaf]

has anyone actually used a powermeter and compared the 2 versions?

1600MHz vs 600MHz is 56W vs 55W on my 3470T. Small difference but measurable.

[romanov.df]

After install from scratch, webserv not start.

Edit to "YES" in rc.conf for web serv & lighttpd

#/etc/rc.d/webserv start

return error:
source: /var/etc/websrv.conf line: 3 position: 21 ....

I go to /var/etc/websrv.conf

line:3 server.document-root = ""

I add path to /usr/local/www

I try onestart webserv, but websrv.conf again have no path

[b0ssman]

change it in the gui

[romanov.df]

change it in the gui

GUI not work.

[raulfg3]

Did all :

Code: Select all

hint.p4tcc.0.disabled=0
hint.acpi_throttle.0.disabled=0

and

Code: Select all

performance_cx_lowest="Cmax"
economy_cx_lowest="Cmax"

and everything went to normal. CPU is again running @400-800 and temperatures dropped down by few degrees.

BTW - if the system values are right, then difference between 1600 and 600Mhz is ~7.5W. Which is a significant difference.

thanks, this works for me too.

[daoyama]

hint.p4tcc.0.disabled=0
hint.acpi_throttle.0.disabled=0
and my CPU is back to normal

Add it by default at SVN r1842.
You don't need add it on 1842 and later.

If you want, you can override this value by System|Advanced|loader.conf.