Hello.
After upgrade to 9.3.0.2.1771 can`t connect to Samba shares with error 53 "The network path was not found".
I don`t change anything. Just upgrade.
The error appear on many clients - Windows 7, Android, Linux.
How to fix this problem?
PS. After incraseing log level i found this errror in log file -
-- cut --
Error loading module '/usr/local/lib/shared-modules/vfs/shadow_copy2.so': /usr/local/lib/samba/libsmbregistry.so: version SAMBA_4.1.18 required by /usr/local/lib/shared-modules/vfs/shadow_copy2.so not found
-- cut --
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Upgrade to 9.3.0.2.1771 and Samba
-
Alyce
- NewUser
- Posts: 10
- Joined: 02 Nov 2012 07:17
- Status: Offline
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Upgrade to 9.3.0.2.1771 and Samba
do you have a full installation? or an embedded?
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
Alyce
- NewUser
- Posts: 10
- Joined: 02 Nov 2012 07:17
- Status: Offline
Re: Upgrade to 9.3.0.2.1771 and Samba
I have Embedded on USB flash.
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Upgrade to 9.3.0.2.1771 and Samba
i dont have access to a nas4free box atm.
can you post your share config.
i think there is an option to disable the snapshot access. this should help you for now to access the shares.
can you post your share config.
i think there is an option to disable the snapshot access. this should help you for now to access the shares.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
Alyce
- NewUser
- Posts: 10
- Joined: 02 Nov 2012 07:17
- Status: Offline
Re: Upgrade to 9.3.0.2.1771 and Samba
Thank You!
I turn off "Enable shadow copy" and now connect to shares is working fine.
Thanks again, b0ssman!
I turn off "Enable shadow copy" and now connect to shares is working fine.
Thanks again, b0ssman!