Redirect PORT (connect outside LAN)

[Flammeur]

Hello folks,

I have recently setup a nas4free. Everything work only the connection from outside the lan does not work. I have open the port between 80 and 5000 on TCP but when i try the IP of my BOX in my browser i can not connect to the nas .

http://imageshack.com/a/img537/7180/Yl0sd1.png

If i missed anything please let me know!

[ChriZathens]

First of all, you should not open a range of ports between 80 and 5000. Open either 80 or 443, depending on if you use http or https to access the webui.
Second it is not the ip of the NAS you should enter to access it from outside, it is the external (wan) address of your network.

[b0ssman]

i would strongly suggest not to do this unless you know exactly what you are doing.

the web gui will also by default not answer to any ip outside the local lan address range.

[Flammeur]

Thank you for your answer , I knnow i should not open a range of port but i am desperate, I am using http and i did enter the ip of my network there is nothing else to configure either the nas or the box?

[b0ssman]

see if your router supports vpn. that would be a way better solution.

[Flammeur]

ok i check that thank you.