This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Lost ZFS pool after using WebGUI shutdown

Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
Veni
NewUser
NewUser
Posts: 12
Joined: 23 Aug 2014 11:24
Location: Sweden
Status: Offline

Lost ZFS pool after using WebGUI shutdown

Post by Veni »

Hi everyone.

Had to shutdown the computer to switch power outlet. After boot, the pool is not coming up.

z800nas4freeusb: ~# uname -a
FreeBSD z800nas4freeusb.local 10.2-RELEASE-p1 FreeBSD 10.2-RELEASE-p1 #0 r287026M: Sat Aug 22 23:58:11 CEST 2015 root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64

NAS4Free version: 10.2.0.2 - Prester (revision 1803)

Disks | Management:

Code: Select all

ada0 	ST8000AS0002-1NA17Z 	7630886MB 	Z8406ZK3 	ahcich6 	Marvell 88SE912x AHCI SATA controller 	Always on 	ZFS storage pool device 	ONLINE
ada1 	ST8000AS0002-1NA17Z 	7630886MB 	Z8406F5S 	ahcich8 	Marvell 88SE912x AHCI SATA controller 	Always on 	ZFS storage pool device 	ONLINE
ada2 	ST8000AS0002-1NA17Z 	7630886MB 	Z8406FBD 	ahcich9 	Marvell 88SE912x AHCI SATA controller 	Always on 	ZFS storage pool device 	ONLINE
ada3 	ST8000AS0002-1NA17Z 	7630886MB 	Z8406ZRX 	ahcich10 	Marvell 88SE912x AHCI SATA controller 	Always on 	ZFS storage pool device 	ONLINE

da0 	SanDisk Cruzer Fit 1.27 	7634MB 	4C530009400704117060 	umass-sim0 	Intel 82801JI (ICH10) USB 2.0 controller USB-B 	Always on 	UFS 	ONLINE
pass0 	Areca RAID controller R001 	0MB 	n/a 	arcmsr0 	Areca SAS 6G Host Adapter RAID Controller (RAID6 capable) 	Always on 	Unknown or unformatted 	ONLINE
pass6 	Marvell 91xx Config 1.01 	0MB 	n/a 	ahcich13 	Marvell 88SE912x AHCI SATA controller 	Always on 	Unknown or unformatted 	ONLINE
System log:

Code: Select all

Aug 29 18:20:40 z800nas4freeusb syslogd: kernel boot file is /boot/kernel/kernel
Aug 29 18:20:40 z800nas4freeusb kernel: Copyright (c) 1992-2015 The FreeBSD Project.
Aug 29 18:20:40 z800nas4freeusb kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Aug 29 18:20:40 z800nas4freeusb kernel: The Regents of the University of California. All rights reserved.
Aug 29 18:20:40 z800nas4freeusb kernel: FreeBSD is a registered trademark of The FreeBSD Foundation.
Aug 29 18:20:40 z800nas4freeusb kernel: FreeBSD 10.2-RELEASE-p1 #0 r287026M: Sat Aug 22 23:58:11 CEST 2015
Aug 29 18:20:40 z800nas4freeusb kernel: root@dev.nas4free.org:/usr/obj/nas4free/usr/src/sys/NAS4FREE-amd64 amd64
Aug 29 18:20:40 z800nas4freeusb kernel: FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
Aug 29 18:20:40 z800nas4freeusb kernel: CPU: Intel(R) Xeon(R) CPU           X5650  @ 2.67GHz (2664.11-MHz K8-class CPU)
Aug 29 18:20:40 z800nas4freeusb kernel: Origin="GenuineIntel"  Id=0x206c2  Family=0x6  Model=0x2c  Stepping=2
Aug 29 18:20:40 z800nas4freeusb kernel: Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Aug 29 18:20:40 z800nas4freeusb kernel: Features2=0x29ee3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,DCA,SSE4.1,SSE4.2,POPCNT,AESNI>
Aug 29 18:20:40 z800nas4freeusb kernel: AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
Aug 29 18:20:40 z800nas4freeusb kernel: AMD Features2=0x1<LAHF>
Aug 29 18:20:40 z800nas4freeusb kernel: VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
Aug 29 18:20:40 z800nas4freeusb kernel: TSC: P-state invariant, performance statistics
Aug 29 18:20:40 z800nas4freeusb kernel: real memory  = 77311508480 (73730 MB)
Aug 29 18:20:40 z800nas4freeusb kernel: avail memory = 75034669056 (71558 MB)
Aug 29 18:20:40 z800nas4freeusb kernel: Event timer "LAPIC" quality 600
Aug 29 18:20:40 z800nas4freeusb kernel: ACPI APIC Table: <HPQOEM TYLSBURG>
Aug 29 18:20:40 z800nas4freeusb kernel: FreeBSD/SMP: Multiprocessor System Detected: 12 CPUs
Aug 29 18:20:40 z800nas4freeusb kernel: FreeBSD/SMP: 2 package(s) x 6 core(s)
Aug 29 18:20:40 z800nas4freeusb kernel: cpu0 (BSP): APIC ID:  0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu1 (AP): APIC ID:  2
Aug 29 18:20:40 z800nas4freeusb kernel: cpu2 (AP): APIC ID:  4
Aug 29 18:20:40 z800nas4freeusb kernel: cpu3 (AP): APIC ID: 16
Aug 29 18:20:40 z800nas4freeusb kernel: cpu4 (AP): APIC ID: 18
Aug 29 18:20:40 z800nas4freeusb kernel: cpu5 (AP): APIC ID: 20
Aug 29 18:20:40 z800nas4freeusb kernel: cpu6 (AP): APIC ID: 32
Aug 29 18:20:40 z800nas4freeusb kernel: cpu7 (AP): APIC ID: 34
Aug 29 18:20:40 z800nas4freeusb kernel: cpu8 (AP): APIC ID: 36
Aug 29 18:20:40 z800nas4freeusb kernel: cpu9 (AP): APIC ID: 48
Aug 29 18:20:40 z800nas4freeusb kernel: cpu10 (AP): APIC ID: 50
Aug 29 18:20:40 z800nas4freeusb kernel: cpu11 (AP): APIC ID: 52
Aug 29 18:20:40 z800nas4freeusb kernel: WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
Aug 29 18:20:40 z800nas4freeusb kernel: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/16 (20150515/tbfadt-644)
Aug 29 18:20:40 z800nas4freeusb kernel: ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20150515/tbfadt-644)
Aug 29 18:20:40 z800nas4freeusb kernel: ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aEventBlock: 16, using default 32 (20150515/tbfadt-725)
Aug 29 18:20:40 z800nas4freeusb kernel: ioapic0: Changing APIC ID to 1
Aug 29 18:20:40 z800nas4freeusb kernel: ioapic1: Changing APIC ID to 2
Aug 29 18:20:40 z800nas4freeusb kernel: ioapic2: Changing APIC ID to 3
Aug 29 18:20:40 z800nas4freeusb kernel: ioapic0 <Version 2.0> irqs 0-23 on motherboard
Aug 29 18:20:40 z800nas4freeusb kernel: ioapic1 <Version 2.0> irqs 24-47 on motherboard
Aug 29 18:20:40 z800nas4freeusb kernel: ioapic2 <Version 2.0> irqs 48-71 on motherboard
Aug 29 18:20:40 z800nas4freeusb kernel: kbd1 at kbdmux0
Aug 29 18:20:40 z800nas4freeusb kernel: random: <Software, Yarrow> initialized
Aug 29 18:20:40 z800nas4freeusb kernel: cryptosoft0: <software crypto> on motherboard
Aug 29 18:20:40 z800nas4freeusb kernel: acpi0: <HPQOEM SLIC-WKS> on motherboard
Aug 29 18:20:40 z800nas4freeusb kernel: acpi0: Power Button (fixed)
Aug 29 18:20:40 z800nas4freeusb kernel: cpu0: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu1: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu2: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu3: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu4: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu5: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu6: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu7: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu8: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu9: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu10: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: cpu11: <ACPI CPU> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: Timecounter "i8254" frequency 1193182 Hz quality 0
Aug 29 18:20:40 z800nas4freeusb kernel: Event timer "i8254" frequency 1193182 Hz quality 100
Aug 29 18:20:40 z800nas4freeusb kernel: atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: Event timer "RTC" frequency 32768 Hz quality 0
Aug 29 18:20:40 z800nas4freeusb kernel: hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: Event timer "HPET" frequency 14318180 Hz quality 350
Aug 29 18:20:40 z800nas4freeusb kernel: Event timer "HPET1" frequency 14318180 Hz quality 340
Aug 29 18:20:40 z800nas4freeusb kernel: Event timer "HPET2" frequency 14318180 Hz quality 340
Aug 29 18:20:40 z800nas4freeusb kernel: Event timer "HPET3" frequency 14318180 Hz quality 340
Aug 29 18:20:40 z800nas4freeusb kernel: Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
Aug 29 18:20:40 z800nas4freeusb kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: device_attach: hpet0 attach returned 12
Aug 29 18:20:40 z800nas4freeusb kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <ACPI PCI bus> on pcib0
Aug 29 18:20:40 z800nas4freeusb kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: pci3: <ACPI PCI bus> on pcib1
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xc000-0xc01f mem 0xfb800000-0xfb81ffff,0xfb000000-0xfb3fffff,0xfb840000-0xfb843fff irq 28 at device 0.0 on pci3
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Using MSIX interrupts with 9 vectors
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Ethernet address: a0:36:9f:0f:22:56
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 0 to cpu 0
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 1 to cpu 1
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 2 to cpu 2
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 3 to cpu 3
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 4 to cpu 4
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 5 to cpu 5
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 6 to cpu 6
Aug 29 18:20:40 z800nas4freeusb kernel: igb0: Bound queue 7 to cpu 7
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: <Intel(R) PRO/1000 Network Connection version - 2.4.0> port 0xc020-0xc03f mem 0xfb820000-0xfb83ffff,0xfb400000-0xfb7fffff,0xfb844000-0xfb847fff irq 40 at device 0.1 on pci3
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Using MSIX interrupts with 9 vectors
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Ethernet address: a0:36:9f:0f:22:57
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 0 to cpu 8
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 1 to cpu 9
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 2 to cpu 10
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 3 to cpu 11
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 4 to cpu 0
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 5 to cpu 1
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 6 to cpu 2
Aug 29 18:20:40 z800nas4freeusb kernel: igb1: Bound queue 7 to cpu 3
Aug 29 18:20:40 z800nas4freeusb kernel: pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: pci15: <ACPI PCI bus> on pcib2
Aug 29 18:20:40 z800nas4freeusb kernel: pci15: <network, ethernet> at device 0.0 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pcib3: <ACPI PCI-PCI bridge> at device 7.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: pci40: <ACPI PCI bus> on pcib3
Aug 29 18:20:40 z800nas4freeusb kernel: arcmsr0: <Areca SAS 6G Host Adapter RAID Controller (RAID6 capable)
Aug 29 18:20:40 z800nas4freeusb kernel: arcmsr version 1.20.00.28 2013-09-13
Aug 29 18:20:40 z800nas4freeusb kernel: > port 0xd000-0xd0ff mem 0xfd100000-0xfd10ffff,0xfd000000-0xfd0fffff irq 30 at device 0.0 on pci40
Aug 29 18:20:40 z800nas4freeusb kernel: Areca RAID adapter0: ARC-1883 F/W version V1.52 2014-12-30
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci0: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb000-0xb01f irq 20 at device 26.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus0 on uhci0
Aug 29 18:20:40 z800nas4freeusb kernel: uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb020-0xb03f irq 21 at device 26.1 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus1 on uhci1
Aug 29 18:20:40 z800nas4freeusb kernel: uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xb040-0xb05f irq 22 at device 26.2 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus2 on uhci2
Aug 29 18:20:40 z800nas4freeusb kernel: ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem 0xdd000800-0xdd000bff irq 22 at device 26.7 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus3: EHCI version 1.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus3 on ehci0
Aug 29 18:20:40 z800nas4freeusb kernel: pcib4: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: pci28: <ACPI PCI bus> on pcib4
Aug 29 18:20:40 z800nas4freeusb kernel: vgapci0: <VGA-compatible display> mem 0xf8000000-0xf8ffffff,0xe0000000-0xefffffff,0xf9000000-0xf9ffffff irq 16 at device 0.0 on pci28
Aug 29 18:20:40 z800nas4freeusb kernel: vgapci0: Boot video device
Aug 29 18:20:40 z800nas4freeusb kernel: pcib5: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: pci2: <ACPI PCI bus> on pcib5
Aug 29 18:20:40 z800nas4freeusb kernel: bge0: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0x5784100> mem 0xde000000-0xde00ffff irq 16 at device 0.0 on pci2
Aug 29 18:20:40 z800nas4freeusb kernel: bge0: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
Aug 29 18:20:40 z800nas4freeusb kernel: miibus0: <MII bus> on bge0
Aug 29 18:20:40 z800nas4freeusb kernel: brgphy0: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus0
Aug 29 18:20:40 z800nas4freeusb kernel: brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Aug 29 18:20:40 z800nas4freeusb kernel: bge0: Using defaults for TSO: 65518/35/2048
Aug 29 18:20:40 z800nas4freeusb kernel: bge0: Ethernet address: 78:ac:c0:3d:9a:45
Aug 29 18:20:40 z800nas4freeusb kernel: pcib6: <ACPI PCI-PCI bridge> irq 21 at device 28.5 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: pci1: <ACPI PCI bus> on pcib6
Aug 29 18:20:40 z800nas4freeusb kernel: bge1: <Broadcom NetLink Gigabit Ethernet Controller, ASIC rev. 0x5784100> mem 0xdf000000-0xdf00ffff irq 17 at device 0.0 on pci1
Aug 29 18:20:40 z800nas4freeusb kernel: bge1: CHIP ID 0x05784100; ASIC REV 0x5784; CHIP REV 0x57841; PCI-E
Aug 29 18:20:40 z800nas4freeusb kernel: miibus1: <MII bus> on bge1
Aug 29 18:20:40 z800nas4freeusb kernel: brgphy1: <BCM5784 10/100/1000baseT PHY> PHY 1 on miibus1
Aug 29 18:20:40 z800nas4freeusb kernel: brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
Aug 29 18:20:40 z800nas4freeusb kernel: bge1: Using defaults for TSO: 65518/35/2048
Aug 29 18:20:40 z800nas4freeusb kernel: bge1: Ethernet address: 78:ac:c0:3d:9a:44
Aug 29 18:20:40 z800nas4freeusb kernel: uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb060-0xb07f irq 20 at device 29.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus4 on uhci3
Aug 29 18:20:40 z800nas4freeusb kernel: uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb080-0xb09f irq 21 at device 29.1 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus5 on uhci4
Aug 29 18:20:40 z800nas4freeusb kernel: uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb0a0-0xb0bf irq 22 at device 29.2 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus6 on uhci5
Aug 29 18:20:40 z800nas4freeusb kernel: ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem 0xdd000c00-0xdd000fff irq 20 at device 29.7 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus7: EHCI version 1.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus7 on ehci1
Aug 29 18:20:40 z800nas4freeusb kernel: pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: pci55: <ACPI PCI bus> on pcib7
Aug 29 18:20:40 z800nas4freeusb kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: isa0: <ISA bus> on isab0
Aug 29 18:20:40 z800nas4freeusb kernel: ahci0: <Intel ICH8 AHCI SATA controller> port 0xb100-0xb107,0xb110-0xb113,0xb108-0xb10f,0xb114-0xb117,0xb0c0-0xb0df mem 0xdd000000-0xdd0007ff irq 18 at device 31.2 on pci0
Aug 29 18:20:40 z800nas4freeusb kernel: ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich0: <AHCI channel> at channel 0 on ahci0
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich1: <AHCI channel> at channel 1 on ahci0
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich2: <AHCI channel> at channel 2 on ahci0
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich3: <AHCI channel> at channel 3 on ahci0
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich4: <AHCI channel> at channel 4 on ahci0
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich5: <AHCI channel> at channel 5 on ahci0
Aug 29 18:20:40 z800nas4freeusb kernel: pcib8: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: pcib8: Length mismatch for 5 range: 3e vs 3c
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <ACPI PCI bus> on pcib8
Aug 29 18:20:40 z800nas4freeusb kernel: pcib9: <ACPI PCI-PCI bridge> at device 3.0 on pci64
Aug 29 18:20:40 z800nas4freeusb kernel: pci66: <ACPI PCI bus> on pcib9
Aug 29 18:20:40 z800nas4freeusb kernel: pcib10: <ACPI PCI-PCI bridge> at device 7.0 on pci64
Aug 29 18:20:40 z800nas4freeusb kernel: pci96: <ACPI PCI bus> on pcib10
Aug 29 18:20:40 z800nas4freeusb kernel: ahci1: <Marvell 88SE912x AHCI SATA controller> port 0xe020-0xe027,0xe040-0xe043,0xe028-0xe02f,0xe044-0xe047,0xe000-0xe00f mem 0xdc100000-0xdc1007ff irq 54 at device 0.0 on pci96
Aug 29 18:20:40 z800nas4freeusb kernel: ahci1: AHCI v1.20 with 8 6Gbps ports, Port Multiplier not supported
Aug 29 18:20:40 z800nas4freeusb kernel: ahci1: quirks=0x900<NOBSYRES,ALTSIG>
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich6: <AHCI channel> at channel 0 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich7: <AHCI channel> at channel 1 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich8: <AHCI channel> at channel 2 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich9: <AHCI channel> at channel 3 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich10: <AHCI channel> at channel 4 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich11: <AHCI channel> at channel 5 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich12: <AHCI channel> at channel 6 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: ahcich13: <AHCI channel> at channel 7 on ahci1
Aug 29 18:20:40 z800nas4freeusb kernel: atapci0: <Marvell 88SE912x UDMA133 controller> port 0xe030-0xe037,0xe048-0xe04b,0xe038-0xe03f,0xe04c-0xe04f,0xe010-0xe01f mem 0xdc100800-0xdc10080f irq 61 at device 0.1 on pci96
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <base peripheral, interrupt controller> at device 16.0 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <base peripheral, interrupt controller> at device 16.1 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <base peripheral, interrupt controller> at device 17.0 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <base peripheral, interrupt controller> at device 17.1 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <base peripheral, interrupt controller> at device 20.0 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <base peripheral, interrupt controller> at device 20.1 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pci64: <base peripheral, interrupt controller> at device 20.2 (no driver attached)
Aug 29 18:20:40 z800nas4freeusb kernel: pcib11: <ACPI Host-PCI bridge> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: pci127: <ACPI PCI bus> on pcib11
Aug 29 18:20:40 z800nas4freeusb kernel: pcib12: <ACPI Host-PCI bridge> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: pci126: <ACPI PCI bus> on pcib12
Aug 29 18:20:40 z800nas4freeusb kernel: acpi_button0: <Power Button> on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Aug 29 18:20:40 z800nas4freeusb kernel: kbd0 at atkbd0
Aug 29 18:20:40 z800nas4freeusb kernel: atkbd0: [GIANT-LOCKED]
Aug 29 18:20:40 z800nas4freeusb kernel: uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
Aug 29 18:20:40 z800nas4freeusb kernel: qpi0: <QPI system bus> on motherboard
Aug 29 18:20:40 z800nas4freeusb kernel: orm0: <ISA Option ROM> at iomem 0xe9000-0xeffff on isa0
Aug 29 18:20:40 z800nas4freeusb kernel: sc0: <System console> at flags 0x100 on isa0
Aug 29 18:20:40 z800nas4freeusb kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Aug 29 18:20:40 z800nas4freeusb kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Aug 29 18:20:40 z800nas4freeusb kernel: ppc0: cannot reserve I/O port range
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp0: <CPU On-Die Thermal Sensors> on cpu0
Aug 29 18:20:40 z800nas4freeusb kernel: est0: <Enhanced SpeedStep Frequency Control> on cpu0
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp1: <CPU On-Die Thermal Sensors> on cpu1
Aug 29 18:20:40 z800nas4freeusb kernel: est1: <Enhanced SpeedStep Frequency Control> on cpu1
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp2: <CPU On-Die Thermal Sensors> on cpu2
Aug 29 18:20:40 z800nas4freeusb kernel: est2: <Enhanced SpeedStep Frequency Control> on cpu2
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp3: <CPU On-Die Thermal Sensors> on cpu3
Aug 29 18:20:40 z800nas4freeusb kernel: est3: <Enhanced SpeedStep Frequency Control> on cpu3
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp4: <CPU On-Die Thermal Sensors> on cpu4
Aug 29 18:20:40 z800nas4freeusb kernel: est4: <Enhanced SpeedStep Frequency Control> on cpu4
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp5: <CPU On-Die Thermal Sensors> on cpu5
Aug 29 18:20:40 z800nas4freeusb kernel: est5: <Enhanced SpeedStep Frequency Control> on cpu5
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp6: <CPU On-Die Thermal Sensors> on cpu6
Aug 29 18:20:40 z800nas4freeusb kernel: est6: <Enhanced SpeedStep Frequency Control> on cpu6
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp7: <CPU On-Die Thermal Sensors> on cpu7
Aug 29 18:20:40 z800nas4freeusb kernel: est7: <Enhanced SpeedStep Frequency Control> on cpu7
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp8: <CPU On-Die Thermal Sensors> on cpu8
Aug 29 18:20:40 z800nas4freeusb kernel: est8: <Enhanced SpeedStep Frequency Control> on cpu8
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp9: <CPU On-Die Thermal Sensors> on cpu9
Aug 29 18:20:40 z800nas4freeusb kernel: est9: <Enhanced SpeedStep Frequency Control> on cpu9
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp10: <CPU On-Die Thermal Sensors> on cpu10
Aug 29 18:20:40 z800nas4freeusb kernel: est10: <Enhanced SpeedStep Frequency Control> on cpu10
Aug 29 18:20:40 z800nas4freeusb kernel: coretemp11: <CPU On-Die Thermal Sensors> on cpu11
Aug 29 18:20:40 z800nas4freeusb kernel: est11: <Enhanced SpeedStep Frequency Control> on cpu11
Aug 29 18:20:40 z800nas4freeusb kernel: xmd version 0.4.4 by NAS4Free Project (experimental)
Aug 29 18:20:40 z800nas4freeusb kernel: xmd: default blocklen 32KB, compression LZ4/LZ4HC, level 6
Aug 29 18:20:40 z800nas4freeusb kernel: xmd0: Loaded preload cloop image </mfsroot.uzip> 17268224 bytes at 0xffffffff8211aa10 (128MB disk w/LZ4)
Aug 29 18:20:40 z800nas4freeusb kernel: random: unblocking device.
Aug 29 18:20:40 z800nas4freeusb kernel: usbus0: 12Mbps Full Speed USB v1.0
Aug 29 18:20:40 z800nas4freeusb kernel: ZFS filesystem version: 5
Aug 29 18:20:40 z800nas4freeusb kernel: ZFS storage pool version: features support (5000)
Aug 29 18:20:40 z800nas4freeusb kernel: Timecounters tick every 1.000 msec
Aug 29 18:20:40 z800nas4freeusb kernel: iSCSI boot driver version 0.2.9
Aug 29 18:20:40 z800nas4freeusb kernel: usbus1: 12Mbps Full Speed USB v1.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus2: 12Mbps Full Speed USB v1.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus3: 480Mbps High Speed USB v2.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus4: 12Mbps Full Speed USB v1.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus5: 12Mbps Full Speed USB v1.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus6: 12Mbps Full Speed USB v1.0
Aug 29 18:20:40 z800nas4freeusb kernel: usbus7: 480Mbps High Speed USB v2.0
Aug 29 18:20:40 z800nas4freeusb kernel: ugen0.1: <Intel> at usbus0
Aug 29 18:20:40 z800nas4freeusb kernel: uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
Aug 29 18:20:40 z800nas4freeusb kernel: ugen2.1: <Intel> at usbus2
Aug 29 18:20:40 z800nas4freeusb kernel: uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
Aug 29 18:20:40 z800nas4freeusb kernel: ugen1.1: <Intel> at usbus1
Aug 29 18:20:40 z800nas4freeusb kernel: uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
Aug 29 18:20:40 z800nas4freeusb kernel: ugen5.1: <Intel> at usbus5
Aug 29 18:20:40 z800nas4freeusb kernel: uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
Aug 29 18:20:40 z800nas4freeusb kernel: ugen4.1: <Intel> at usbus4
Aug 29 18:20:40 z800nas4freeusb kernel: uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Aug 29 18:20:40 z800nas4freeusb kernel: ugen3.1: <Intel> at usbus3
Aug 29 18:20:40 z800nas4freeusb kernel: uhub5: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
Aug 29 18:20:40 z800nas4freeusb kernel: ugen7.1: <Intel> at usbus7
Aug 29 18:20:40 z800nas4freeusb kernel: uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
Aug 29 18:20:40 z800nas4freeusb kernel: ugen6.1: <Intel> at usbus6
Aug 29 18:20:40 z800nas4freeusb kernel: uhub7: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
Aug 29 18:20:40 z800nas4freeusb kernel: uhub0: 2 ports with 2 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: uhub1: 2 ports with 2 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: uhub2: 2 ports with 2 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: uhub3: 2 ports with 2 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: uhub4: 2 ports with 2 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: uhub7: 2 ports with 2 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: uhub5: 6 ports with 6 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: uhub6: 6 ports with 6 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: ugen7.2: <vendor 0x0409> at usbus7
Aug 29 18:20:40 z800nas4freeusb kernel: uhub8: <vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2> on usbus7
Aug 29 18:20:40 z800nas4freeusb kernel: uhub8: 4 ports with 0 removable, self powered
Aug 29 18:20:40 z800nas4freeusb kernel: ugen3.2: <SanDisk> at usbus3
Aug 29 18:20:40 z800nas4freeusb kernel: umass0: <SanDisk Cruzer Fit, class 0/0, rev 2.00/1.27, addr 2> on usbus3
Aug 29 18:20:40 z800nas4freeusb kernel: umass0:  SCSI over Bulk-Only; quirks = 0x8100
Aug 29 18:20:40 z800nas4freeusb kernel: umass0:15:0:-1: Attached to scbus15
Aug 29 18:20:40 z800nas4freeusb kernel: usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER
Aug 29 18:20:40 z800nas4freeusb kernel: ugen7.3: <ATEN> at usbus7
Aug 29 18:20:40 z800nas4freeusb kernel: ukbd0: <USB Keyboard Device> on usbus7
Aug 29 18:20:40 z800nas4freeusb kernel: kbd2 at ukbd0
Aug 29 18:20:40 z800nas4freeusb kernel: da0 at umass-sim0 bus 0 scbus15 target 0 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: da0: <SanDisk Cruzer Fit 1.27> Removable Direct Access SPC-4 SCSI device
Aug 29 18:20:40 z800nas4freeusb kernel: cd0 at ahcich0 bus 0 scbus1 target 0 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: cd0: <hp DVD RW AD-7251H5 1H8D> Removable CD-ROM SCSI device
Aug 29 18:20:40 z800nas4freeusb kernel: cd0: Serial Number 2305422L21
Aug 29 18:20:40 z800nas4freeusb kernel: cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
Aug 29 18:20:40 z800nas4freeusb kernel: cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Aug 29 18:20:40 z800nas4freeusb kernel: da0: Serial Number 4C530009400704117060
Aug 29 18:20:40 z800nas4freeusb kernel: da0: 40.000MB/s transfers
Aug 29 18:20:40 z800nas4freeusb kernel: da0: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C)
Aug 29 18:20:40 z800nas4freeusb kernel: da0: quirks=0x2<NO_6_BYTE>
Aug 29 18:20:40 z800nas4freeusb kernel: ada0 at ahcich6 bus 0 scbus7 target 0 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: ada0: <ST8000AS0002-1NA17Z AR13> ACS-2 ATA SATA 3.x device
Aug 29 18:20:40 z800nas4freeusb kernel: ada0: Serial Number Z8406ZK3
Aug 29 18:20:40 z800nas4freeusb kernel: ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug 29 18:20:40 z800nas4freeusb kernel: ada0: Command Queueing enabled
Aug 29 18:20:40 z800nas4freeusb kernel: ada0: 7630885MB (15628053168 512 byte sectors: 16H 63S/T 16383C)
Aug 29 18:20:40 z800nas4freeusb kernel: ada0: Previously was known as ad16
Aug 29 18:20:40 z800nas4freeusb kernel: ada1 at ahcich8 bus 0 scbus9 target 0 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: ada1: <ST8000AS0002-1NA17Z AR13> ACS-2 ATA SATA 3.x device
Aug 29 18:20:40 z800nas4freeusb kernel: ada1: Serial Number Z8406F5S
Aug 29 18:20:40 z800nas4freeusb kernel: ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug 29 18:20:40 z800nas4freeusb kernel: ada1: Command Queueing enabled
Aug 29 18:20:40 z800nas4freeusb kernel: ada1: 7630885MB (15628053168 512 byte sectors: 16H 63S/T 16383C)
Aug 29 18:20:40 z800nas4freeusb kernel: ada1: Previously was known as ad20
Aug 29 18:20:40 z800nas4freeusb kernel: ada2 at ahcich9 bus 0 scbus10 target 0 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: ada2: <ST8000AS0002-1NA17Z AR13> ACS-2 ATA SATA 3.x device
Aug 29 18:20:40 z800nas4freeusb kernel: ada2: Serial Number Z8406FBD
Aug 29 18:20:40 z800nas4freeusb kernel: ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug 29 18:20:40 z800nas4freeusb kernel: ada2: Command Queueing enabled
Aug 29 18:20:40 z800nas4freeusb kernel: ada2: 7630885MB (15628053168 512 byte sectors: 16H 63S/T 16383C)
Aug 29 18:20:40 z800nas4freeusb kernel: ada2: Previously was known as ad22
Aug 29 18:20:40 z800nas4freeusb kernel: ada3 at ahcich10 bus 0 scbus11 target 0 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: ada3: <ST8000AS0002-1NA17Z AR13> ACS-2 ATA SATA 3.x device
Aug 29 18:20:40 z800nas4freeusb kernel: ada3: Serial Number Z8406ZRX
Aug 29 18:20:40 z800nas4freeusb kernel: ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
Aug 29 18:20:40 z800nas4freeusb kernel: ada3: Command Queueing enabled
Aug 29 18:20:40 z800nas4freeusb kernel: ada3: 7630885MB (15628053168 512 byte sectors: 16H 63S/T 16383C)
Aug 29 18:20:40 z800nas4freeusb kernel: ada3: Previously was known as ad24
Aug 29 18:20:40 z800nas4freeusb kernel: pass0 at arcmsr0 bus 0 scbus0 target 16 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: pass0: <Areca RAID controller R001> Fixed Processor SCSI device
Aug 29 18:20:40 z800nas4freeusb kernel: pass6 at ahcich13 bus 0 scbus14 target 0 lun 0
Aug 29 18:20:40 z800nas4freeusb kernel: pass6: <Marvell 91xx Config 1.01> Removable Processor SCSI device
Aug 29 18:20:40 z800nas4freeusb kernel: pass6: Serial Number HKDP221516WL
Aug 29 18:20:40 z800nas4freeusb kernel: pass6: 150.000MB/s transfers (SATA 1.x, UDMA4, ATAPI 12bytes, PIO 8192bytes)
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_core0: <mlx4_core> mem 0xfc000000-0xfc0fffff,0xfa000000-0xfa7fffff irq 24 at device 0.0 on pci15
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_core: Mellanox ConnectX core driver v2.1 (Aug 22 2015)
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.1 (Aug 22 2015)
Aug 29 18:20:40 z800nas4freeusb kernel: mlxen0: Ethernet address: 00:02:c9:19:75:e0
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_en: mlx4_core0: Port 1: Using 12 TX rings
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_en: mlx4_core0: Port 1: Using 8 RX rings
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_en: mlxen0: Using 12 TX rings
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_en: mlxen0: Using 8 RX rings
Aug 29 18:20:40 z800nas4freeusb kernel: mlx4_en: mlxen0: Initializing port
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #2 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #6 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #1 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #10 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #5 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #11 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #3 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #7 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #4 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #9 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: SMP: AP CPU #8 Launched!
Aug 29 18:20:40 z800nas4freeusb kernel: Timecounter "TSC-low" frequency 1332055746 Hz quality 1000
Aug 29 18:20:40 z800nas4freeusb kernel: Trying to mount root from ufs:/dev/xmd0 []...
Aug 29 18:20:40 z800nas4freeusb kernel: 3          1 s 97.0 %        51.3 MiB / 554.0 MiB = 0.093    39 MiB/s       0:14          1 s 99.9 %        52.9 MiB / 664.0 MiB = 0.080    44 MiB/s       0:15          1 s  100 %        52.9 MiB / 768.0 MiB = 0.069    49 MiB/s       0:15
Aug 29 18:20:40 z800nas4freeusb kernel: ums0: <USB Mouse Device> on usbus7
Aug 29 18:20:40 z800nas4freeusb kernel: ums0: 3 buttons and [Z] coordinates ID=0
Aug 29 18:20:47 z800nas4freeusb kernel: ada0
Aug 29 18:20:47 z800nas4freeusb kernel: ada1
Aug 29 18:20:47 z800nas4freeusb kernel: ada2
Aug 29 18:20:48 z800nas4freeusb kernel: ada3
Aug 29 18:20:48 z800nas4freeusb lighttpd[2325]: (log.c.164) server started
Aug 29 18:20:48 z800nas4freeusb login: login on ttyv0 as root
Aug 29 18:21:02 z800nas4freeusb lighttpd[2325]: (connections.c.137) (warning) close: 8 Connection reset by peer
The 4 disks are mounted inside a 8 disk cabinett utilizing port multipler over eSATA(ad0, ad1, ad2, ad3), connected to a Marvell 9123 based PCIe2 x1 card running, not utilizing any onboard RAID functions(running AHCI):

Image

The drives are ZFS Storage pool formatted with GPT.

The computer is a HP Z800 currently equipped with 72 GB RAM and two Intel CPU X5650 with HT disabled.
Power comes from a APC Smart UPS.

NAS4Free is on a USB stick(da0). The Areca RAID Controller is for a ESXi installation, but the array is not in use on the NAS4Free boot(Areca array encrypted by the controller and there for Areca array not seen unless explicitly decrypted durring BIOS initialization). Using the Areca and da0 USB boot stick I can turn the computer to a raw NAS4Free installation or a ESXi installation, depending on what I need at the moment.

Using ZFS as a backup/archive solution for a Windows machine(running zvol over iSCSI).
The pool was a raidz1 pool. No ZFS cache or log devices.

Unable to import ZFS on disk configuration(even if pressing it one more time for it to force import).

FYI, no user data is on the drives. The zvol was currently in the process of being fully encrypted at the by DiskCryptor from Windows. And this is basically in the begining of a dry-run-test of ZFS to see if it works on NAS4Free/FreeBSD and zVolumes. I am curious of why this happend even if I paused the encryption process, unmounted the volume in DiskCryptor, logged off from the iSCSI target in Windows, used Shutdown in the WebGUI and later powered down the external drive cabinet after the computer had shutdown and the cabinett controller+HDD lights were off. The process had been going on for 1 day and 15 hours without any reported problems.

This is what I get from zpool import

Code: Select all

  pool: poolbackup
     id: 10331566604651966214
  state: UNAVAIL
 status: One or more devices are missing from the system.
 action: The pool cannot be imported. Attach the missing
        devices and try again.
   see: http://illumos.org/msg/ZFS-8000-3C
 config:

        poolbackup                UNAVAIL  insufficient replicas
          raidz1-0                UNAVAIL  insufficient replicas
            16938149659799859453  UNAVAIL  cannot open
            2674318575200497108   UNAVAIL  cannot open
            2898103839620641959   UNAVAIL  cannot open
            ada3p1                ONLINE
But all the drives are there, and I can not see that it would in any way swap places on 3 drives(I don't understand why the system log says "Previously was known as" several times, even after a reboot). The encryption takes approximately 2 days to finish, so I would like to try to get the pool up and running to continue from the point I paused the encryption process. Even if i restart this process from scratch, I will test so that it survives both a reboot and shutdown, as well as testing power failures and power surges, before I start to test the filesystem.

The install is brand new, but I see that a newer version is out.

Suggestions to someone not familiar with ZFS? Been using FreeNAS 0.7.x and later NAS4Free for some time both on physical hardware sharing drives over iSCSI and some virtualized using UFS on a VMWare disk, but never before tried a resilient file system on bare metal.
Top
Veni
NewUser
NewUser
Posts: 12
Joined: 23 Aug 2014 11:24
Location: Sweden
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by Veni »

Forgot to mention if it's of importance:

The zvol block size is not 8k. It's 128k(had to use it). The first test showed that there was less space left in the pool compared to how much was done/remained to encrypt, so according to Google, someone found this out some years ago when using zvol and the result of the test data was that 128k blocks used storage space more efficiently.
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by b0ssman »

please read
https://forums.freenas.org/index.php?th ... ine.12484/
this applies to nas4free as well.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
Veni
NewUser
NewUser
Posts: 12
Joined: 23 Aug 2014 11:24
Location: Sweden
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by Veni »

Hi b0ssman.
Thanks for the quick response.

I've now read the 1st post with the 8 points where jgreco points out concerns about running FreeNAS inside a virtual machine. But I've must have missed something because I can not relate to the problem at hand I have with the ZFS pool. NAS4Free is for example able to read the SMART data from ad0, ad1, ad2 and ad3. It's running on bare metal as a embedded install booting from a USB stick.
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by b0ssman »

what about point 6?
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
Veni
NewUser
NewUser
Posts: 12
Joined: 23 Aug 2014 11:24
Location: Sweden
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by Veni »

Thanks for clarifying.
FreeNAS with hardware PCI passthrough of the storage controller (Intel VT-d) is a smart idea, as it actually addresses the three points above. However, PCI passthrough on most consumer and prosumer grade motherboards is unlikely to work reliably. VT-d for your storage controller is dangerous and risky to your pool. A few server manufacturers seem to have a handle on making this work correctly, but do NOT assume that your non-server-grade board will reliably support this (even if it appears to).
If the above quote is the one, then I can not see how it pertains to this NAS4Free install. NAS4Free on the HP Z800 is on the bare metal. Or do you suggest that the Marvell controller is being exposed to NAS4Free over Intel VT-d because the option is enabled in BIOS? My thought was that only virtualization software that are Intel VT-d aware are able to use it, and so I can not see why NAS4Free would try to virtualize anything.

I believe that either I am confused or you know more about my hardware that is not documented.
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by b0ssman »

i was refering to your post saying

Using the Areca and da0 USB boot stick I can turn the computer to a raw NAS4Free installation or a ESXi installation, depending on what I need at the moment.
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
Veni
NewUser
NewUser
Posts: 12
Joined: 23 Aug 2014 11:24
Location: Sweden
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by Veni »

That sentence was for clarifying why there is a Areca RAID card in computer. Looks like the clarification failed it's intended purpose. Areca is for ESXi boot and d0 is for NAS4Free boot. That way I can easily choose which system to boot and because the Areca array is encrypted by Areca it's array is not visible to NAS4Free.

Either the computer is running ESXi or NAS4Free. It does not run both simultaneously on bare metal and the Areca card is not used by NAS4Free for accessing any ZFS drives(as per the rundown of what uses what and why). My question is why 3 drives after a shutdown still were identified by the Disks | Management without problems but zpool import showed them as unavailable, and what steps to take for finding the cause and get the pool up and running.
Top
User avatar
b0ssman
Forum Moderator
Forum Moderator
Posts: 2438
Joined: 14 Feb 2013 08:34
Location: Munich, Germany
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by b0ssman »

cann you try the drives on the Intel ICH8 AHCI SATA controller ?
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
Top
Veni
NewUser
NewUser
Posts: 12
Joined: 23 Aug 2014 11:24
Location: Sweden
Status: Offline

Re: Lost ZFS pool after using WebGUI shutdown

Post by Veni »

The port multiplier support in FreeBSD for ICH10 is broken, at least in my configuration(cabinet running SATA 3.x with JMicron+FreeBSD). Have tried the internal ports before I bought a ASMedia 1061 and later Marvell 9123 based SATA controller. The ASMedia has the same problems as ICH10 on FreeBSD if the drives are connected to JMicron(SCSI timeouts, sometimes drives not seen at all). On Windows ICH10 port multiplier support is non-existent in Intels drivers but the ASMedia 1061 worked perfectly in Windows, so I've stayed with Marvell 9123 on FreeBSD because after constant transfer for almost 1.5 days @ 2-3 Gbps no SCSI command error occurred.

I've now destroyed the pool and started over. Noticed that I used the sparse volume attribute in the zvol before. This time I have not used it. Have tried the same shutdown sequence as before twice, and still OK.
Top
Post Reply

Return to “ZFS (only!)”