NAS4Free 10.2.0.2.1814 released (FreeBSD 10.2-RELEASE-P2)

[zoon01]

The nas4free team is pleased to announce the release of 10.2.0.2.1814
This release directly replace rev.1803 & 1810 because of some ssh / samba ad / lib errors.
1803 deleted from SF.

http://sourceforge.net/projects/nas4fre ... .0.2.1814/

Everyone can upgrade from NAS4Free version 9.3.0.2.1310 or Higher.

README & CHANGELOG

NAS4Free Upgrade from below 9.3.0.2.1310 is NOT possible!!!
=====================================================
Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
** ! Tools to write extracted embedded file are not supported ! **
You must use the liveusb/CD for it's first installation!!!.

Install from scratch notes
======================
** Embedded.img.xz is only for upgrades by WEBGUI, do not extract and write to any media! **

Download NAS4Free livecd or liveusb and boot from it.
The compressed LiveUSB.img.gz needs to be extracted before you can write it to usb media,
you can use it with Win32DiskImager or any other tool.
Press 9 for the install menu and perform an embedded installation.

Upgrade note:
============
You must associate CARP with physical interface explicitly after upgrading to 10.X.
You may need modifying your NFS and AFP share setting.
You may need modifying your ftp setting, no longer SSL is supported (only TLS).
Send Buffer Size/Receive Buffer Size in CIFS/SMB is changed to 128480 since 9.3.0.2.1375.
/var and /var/tmp size has changed.
After the upgrade please do make a new backup of your config System|Backup/Restore.

Extended GUI note!
Don't use current Extended GUI on 10.2.0.2 series yet, disable it first before upgrade.

ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize.

Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 10.2.0.2.1814
=================
Changes:
- Upgrade to FreeBSD 10.2-RELEASE-P2.
- Add Mellanox ConnectX-2 EN driver module. (x64 only)
- Upgrade bash 4.3 to patch 42.
- Upgrade lighttpd to 1.4.36.

Fixes:
- Undefined symbol "av_find_stream_info" in fuppes/libmetadata_libavformat.so.
- AFP share is not advised.
- Fix webserver user logins.

Note:
- iperf2 has been replaced for iperf3 because of inconsistent results for UDP above 2Gbps.
- iperf3 is not backwards compatible with iperf2.x.

Permanent restrictions:
- It is not possible to format a SoftRAID disk with MSDOS FAT16/32.
- It is not possible to encrypt a disk partition, only complete disks are supported.
- AFP shares with TimeMachine support are limited to max. 4 shares.

Regards,
The NAS4Free Team

[JoseMR]

DLNA/UPnP is working as expected, thanks devs for the prompt fix release.

[zoon01]

Your welcome, thanks to confirm working.

[JoseMR]

I found a cosmetic minor bug, shutting down the server makes a single short beep sound instead of echoing the stop beep tune.

[defcon999]

I can't believe ... FUPPES works great

Perfect job, guys!!!

defcon999

[rtp]

Hi Guys,

I'm pretty sure that a recent upgrade (one of the 18xx series over previous 17xx) has broken my OwnCloud install (the update to N4F is the only change I've made). Owncloud is installed straight on N4F rather than in jail. I'm getting the error - "413 - Request Entity Too Large" when logging into OC (I don't get as far as being able to upload files), which all my research suggests there may be some config in the web server or PHP which is limiting the file size.

Are you aware of any change that could have impacted this?

Thanks for all your work.
Roger

[sea1150]

Hi Guys,

I'm pretty sure that a recent upgrade (one of the 18xx series over previous 17xx) has broken my OwnCloud install (the update to N4F is the only change I've made). Owncloud is installed straight on N4F rather than in jail. I'm getting the error - "413 - Request Entity Too Large" when logging into OC (I don't get as far as being able to upload files), which all my research suggests there may be some config in the web server or PHP which is limiting the file size.

Are you aware of any change that could have impacted this?

Thanks for all your work.
Roger

Try changing "Services | Webserver" option "Upload directory". Specify the location on your drives .
Improved version of lighttpd to 1.4.36 (Commit [r1794]) . Do not use server.network-backend = "writev".
if not help , then wait until the developers NAS4Free will not increase version of lighttpd to 1.4.37 (Changes from 1.4.36)

[rtp]

Try changing "Services | Webserver" option "Upload directory". Specify the location on your drives .
Improved version of lighttpd to 1.4.36 (Commit [r1794]) . Do not use server.network-backend = "writev".
if not help , then wait until the developers NAS4Free will not increase version of lighttpd to 1.4.37 (Changes from 1.4.36)

Thanks, the Webserver change highlighted that it was pointing at a directory that didn't exist. Not sure why not, because it must have done at some point, but don't think it was the upgrade that deleted it. The problem is now solved

[Jack Foobar]

This release seems to be working well as far as samba is concerned. Speed increased 20 MB/s. Fairly stable. Thanks for the work.

[Stuarty]

Everything seems to be working for me except that I can no longer access the web GUI. All I see when I visit the url is a blank page. I can see that my jails and services are running and that lighttpd is running but there's no server web GUI. Are there logs that I can check and where are they?

[apollo567]

Everything seems to be working for me except that I can no longer access the web GUI. All I see when I visit the url is a blank page. I can see that my jails and services are running and that lighttpd is running but there's no server web GUI. Are there logs that I can check and where are they?

did you delete your Browser cache ?

[spy0r]

Hi,

got some samba lib errors in this build, too. They don't seem to affect anything right now.

Code: Select all

Sep 6 12:12:15	stef-nas4free	smbd[35562]: refusing to dump core
Sep 6 12:12:15	stef-nas4free	smbd[35562]: unable to change to %N.core
Sep 6 12:12:15	stef-nas4free	smbd[35562]: [2015/09/06 12:12:15.464295, 0] ../source3/lib/dumpcore.c:313(dump_core)
Sep 6 12:12:15	stef-nas4free	smbd[35562]: #5 0x80145c1a8 <pthread_getspecific+0xdd8> at /lib/libthr.so.3
Sep 6 12:12:15	stef-nas4free	smbd[35562]: #4 0x80145c9aa <pthread_sigmask+0x4aa> at /lib/libthr.so.3
Sep 6 12:12:15	stef-nas4free	smbd[35562]: #3 0x80168e957 <fault_setup+0x157> at /usr/local/lib/libsamba-util.so.0
Sep 6 12:12:15	stef-nas4free	smbd[35562]: #2 0x80168eaad <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Sep 6 12:12:15	stef-nas4free	smbd[35562]: #1 0x8035ba892 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Sep 6 12:12:15	stef-nas4free	smbd[35562]: #0 0x8035ba9a8 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Sep 6 12:12:15	stef-nas4free	smbd[35562]: BACKTRACE: 6 stack frames:
Sep 6 12:12:15	stef-nas4free	smbd[35562]: [2015/09/06 12:12:15.463588, 0] ../source3/lib/util.c:899(log_stack_trace)
Sep 6 12:12:15	stef-nas4free	smbd[35562]: PANIC (pid 35562): internal error
Sep 6 12:12:15	stef-nas4free	smbd[35562]: [2015/09/06 12:12:15.456686, 0] ../source3/lib/util.c:788(smb_panic_s3)
Sep 6 12:12:15	stef-nas4free	smbd[35562]: ===============================================================
Sep 6 12:12:15	stef-nas4free	smbd[35562]: [2015/09/06 12:12:15.456601, 0] ../lib/util/fault.c:81(fault_report)
Sep 6 12:12:15	stef-nas4free	smbd[35562]: Please read the Trouble-Shooting section of the Samba HOWTO
Sep 6 12:12:15	stef-nas4free	smbd[35562]: INTERNAL ERROR: Signal 11 in pid 35562 (4.2.3)
Sep 6 12:12:15	stef-nas4free	smbd[35562]: [2015/09/06 12:12:15.456491, 0] ../lib/util/fault.c:79(fault_report)
Sep 6 12:12:15	stef-nas4free	smbd[35562]: ===============================================================
Sep 6 12:12:15	stef-nas4free	smbd[35562]: [2015/09/06 12:12:15.456363, 0] ../lib/util/fault.c:78(fault_report)

do you have some advices how i can troubleshoot this?

Thanks,
Stef

[crowi]

updated my servers and everything works again (especially ssh connection between the boxes).
Thanks, guys for this fix! Great job!

[Parkcomm]

All good here too. Thanks guys

[nicolap8]

Hi,
I have a process that start continuously

4333 root 1 28 0 34892K 16884K piperd 0 0:00 0.00% php-cgi

at every refresh of top the pid incremented by some units!
I noted because before the reboot it was near 80000.

How can track/stop this process?
Thanks