This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!


I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!

Some bootup problems hdd`s

Hard disks, HDD, RAID Hardware, disk controllers, SATA, PATA, SCSI, IDE, On Board, USB, Firewire, CF (Compact Flash)
Forum rules
• Set-Up Guide • FAQs • Forum Rules
Post Reply
User avatar
lindsay
Forum Moderator
Forum Moderator
Posts: 282
Joined: 23 Jun 2012 09:59
Location: Steinkjer,Norway
Status: Offline

Some bootup problems hdd`s

Post by lindsay »

If i start the server in the server room it boots up OK with the LSI controller.

But if i reboot or sends a WOL it is only the hdd`s connected to the internal SATA ports wich is detected
You do not have the required permissions to view the files attached to this post.
Protected by smoothiebox Red,Green,
Purple,Orange Zones/VLAN`s
Powered by AMD A10-6700T


XigmaNAS Box-1 11.2.0.4 - Omnius (revision 6625)
Platform : x64-embedded on 2X Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
Motherboard: ASUS Z10PA-D8, 2xSocket-2011-3
SATA Controllers : 1X Avago Technologies (LSI) SAS2008 and 1x Avago Technologies (LSI) SAS2308
Pool 1 (Media-Pool) 8X4TB in raidz2
Pool 2 (Media-Pool-2) 4X2TB in raidz2 and 2X2TB in mirror mirror and 2X3TB in mirror
Pool 3 (Media-Pool-3) 2X2TB in mirror and 2X4TB in mirror and 2X1TB in mirror
Top
User avatar
Parkcomm
Advanced User
Advanced User
Posts: 384
Joined: 21 Sep 2012 12:58
Location: Australia
Status: Offline

Re: Some bootup problems hdd`s

Post by Parkcomm »

could you post the dmesg output for both cases
NAS4Free Embedded 10.2.0.2 - Prester (revision 2003), HP N40L Microserver (AMD Turion) with modified BIOS, ZFS Mirror 4 x WD Red + L2ARC 128M Apple SSD, 10G ECC Ram, Intel 1G CT NIC + inbuilt broadcom
Top
Post Reply

Return to “Hard disk & controller”