Hi
I activated https with port 445 and I cannot access my CIFS/SMB shares anymore. As soon as I revert back to http, everything is fine.
Anyone have any ideas what could be causing this?
I've been lloking around the forum and documentation but cannot find any solution.
Thanks for you help.
This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Activated https. Can no longer access CIFS/SMB shares
-
jamilian
- NewUser
- Posts: 4
- Joined: 07 Aug 2015 10:48
- Status: Offline
-
b0ssman
- Forum Moderator
- Posts: 2438
- Joined: 14 Feb 2013 08:34
- Location: Munich, Germany
- Status: Offline
Re: Activated https. Can no longer access CIFS/SMB shares
because port 445 is used by smb
Nas4Free 11.1.0.4.4517. Supermicro X10SLL-F, 16gb ECC, i3 4130, IBM M1015 with IT firmware. 4x 3tb WD Red, 4x 2TB Samsung F4, both GEOM AES 256 encrypted.
-
Parkcomm
- Advanced User
- Posts: 384
- Joined: 21 Sep 2012 12:58
- Location: Australia
- Status: Offline
Re: Activated https. Can no longer access CIFS/SMB shares
You should use port 443, the default for https
NAS4Free Embedded 10.2.0.2 - Prester (revision 2003), HP N40L Microserver (AMD Turion) with modified BIOS, ZFS Mirror 4 x WD Red + L2ARC 128M Apple SSD, 10G ECC Ram, Intel 1G CT NIC + inbuilt broadcom
-
jamilian
- NewUser
- Posts: 4
- Joined: 07 Aug 2015 10:48
- Status: Offline
Re: Activated https. Can no longer access CIFS/SMB shares
in 9.1 I used port 4'( no problem. Only since I upgraded to 10.2 I get this problem.
-
jamilian
- NewUser
- Posts: 4
- Joined: 07 Aug 2015 10:48
- Status: Offline
Re: Activated https. Can no longer access CIFS/SMB shares
sorry, port 445
-
raulfg3
- Site Admin
- Posts: 4865
- Joined: 22 Jun 2012 22:13
- Location: Madrid (ESPAÑA)
- Contact:
- Status: Offline
Re: Activated https. Can no longer access CIFS/SMB shares
you probably use SMB2 = Port 139 , new version use 445jamilian wrote:in 9.1 I used port 4'( no problem. Only since I upgraded to 10.2 I get this problem.
12.1.0.4 - Ingva (revision 7743) on SUPERMICRO X8SIL-F 8GB of ECC RAM, 11x3TB disk in 1 vdev = Vpool = 32TB Raw size , so 29TB usable size (I Have other NAS as Backup)
Wiki
Last changes
HP T510
Wiki
Last changes
HP T510
-
jamilian
- NewUser
- Posts: 4
- Joined: 07 Aug 2015 10:48
- Status: Offline
Re: Activated https. Can no longer access CIFS/SMB shares
ok thanks for your help:-) I'll try it and let you know:-)