NAS4Free 10.2.0.2.1855 released (FreeBSD 10.2-RELEASE-P3)

[zoon01]

The nas4free team is pleased to announce the release of 10.2.0.2.1855
This release directly replace rev.1803 & 1810 because of some ssh / samba ad / lib errors.
1803 deleted from SF.

http://sourceforge.net/projects/nas4fre ... .0.2.1855/

Everyone can upgrade from NAS4Free version 9.3.0.2.1310 or Higher.

README & CHANGELOG

NAS4Free Upgrade from below 9.3.0.2.1310 is NOT possible!!!
=====================================================
Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
** ! Tools to write extracted embedded file are not supported ! **
You must use the liveusb/CD for it's first installation!!!.

Install from scratch notes
======================
** Embedded.img.xz is only for upgrades by WEBGUI, do not extract and write to any media! **

Download NAS4Free livecd or liveusb and boot from it.
The compressed LiveUSB.img.gz needs to be extracted before you can write it to usb media,
you can use it with Win32DiskImager or any other tool.
Press 9 for the install menu and perform an embedded installation.

Upgrade note:
============
You must associate CARP with physical interface explicitly after upgrading to 10.X.
You may need modifying your NFS and AFP share setting.
You may need modifying your ftp setting, no longer SSL is supported (only TLS).
Send Buffer Size/Receive Buffer Size in CIFS/SMB is changed to 128480 since 9.3.0.2.1375.
/var and /var/tmp size has changed.
After the upgrade please do make a new backup of your config System|Backup/Restore.

Extended GUI note!
Don't use current Extended GUI on 10.2.0.2 series yet, disable it first before upgrade.

ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize.

Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 10.2.0.2.1855
=================
Changes:
- Upgrade to FreeBSD 10.2-RELEASE-P3.
- Add Mellanox ConnectX-2 EN driver module. (x64 only)
- Add Auxiliary parameters in Samba AD.
- Add bhyve and related files. (CLI only)
- Add hint.acpi_throttle.0.disabled="0", hint.p4tcc.0.disabled="0".
- Add dlna user and group.
- Remove usesendfile on CIFS/SMB.
- Upgrade bash 4.3 to patch 42.
- Upgrade lighttpd to 1.4.37.
- Upgrade php to 5.6.13.
- Upgrade samba to 4.2.4.
- Upgrade isboot to 0.2.11.
- Upgrade tzdata to 2015g.

Fixes:
- Fix boot time ntpdate fail when AD DC enabled.
- Fix wrong path in Samba AD. (ticket #228, #232)
- Undefined symbol "av_find_stream_info" in fuppes/libmetadata_libavformat.so.
- AFP share is not advised.
- Fix webserver user logins.
- Fix wrong path ticket 228.

Note:
- iperf2 has been replaced for iperf3 because of inconsistent results for UDP above 2Gbps.
- iperf3 is not backwards compatible with iperf2.x.

Permanent restrictions:
- It is not possible to format a SoftRAID disk with MSDOS FAT16/32.
- It is not possible to encrypt a disk partition, only complete disks are supported.
- AFP shares with TimeMachine support are limited to max. 4 shares.

Regards,
The NAS4Free Team

[daoyama]

This is first BHyVe supported version. You can install NAS4Free to BHyVe VM.
Also you can create VM on NAS4Free.
For more, please read [HOWTO] bhyve under NAS4Free.

You can see the VM from index.php:

20151002A.png

NAS4Free on NAS4Free:

20151002B.png

[Jack Foobar]

x64 embedded works fine except for mDNS errors which look suspiciously like a type-o. Sending private message due to private info.

No errors in logs except for these two:

Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 100.0.0.10.in-addr.arpa. (PTR) that's already in the list
Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 server.local. (Addr) that's already in the list

Strange thing is, I'm not sure what 100.0.0.10 is referring to. There is nothing like that in my DNS or network. Perhaps it's a default... wait a minute.. That's the IP of my server backwards. The server ip is 10.0.0.100. Is it flipping it? Or is it just a coincidence. I've seen this error with every build thus far.

Nice work btw. I appreciate how you guys don't release broken crap out of the gate. dd-wrt and freenas could take some pointers from you guys. Take care.

[spy0r]

Hey guys,

i still have some smb lib errors with this build - any suggestion how i can troubleshoot theese? They don't seem to affect anything right now.

Code: Select all

Oct 3 13:04:20	stef-nas4free	smbd[8951]: refusing to dump core
Oct 3 13:04:20	stef-nas4free	smbd[8951]: unable to change to %N.core
Oct 3 13:04:20	stef-nas4free	smbd[8951]: [2015/10/03 13:04:20.472567, 0] ../source3/lib/dumpcore.c:313(dump_core)
Oct 3 13:04:20	stef-nas4free	smbd[8951]: #5 0x80145c1a8 <pthread_getspecific+0xdd8> at /lib/libthr.so.3
Oct 3 13:04:20	stef-nas4free	smbd[8951]: #4 0x80145c9aa <pthread_sigmask+0x4aa> at /lib/libthr.so.3
Oct 3 13:04:20	stef-nas4free	smbd[8951]: #3 0x80168e957 <fault_setup+0x157> at /usr/local/lib/libsamba-util.so.0
Oct 3 13:04:20	stef-nas4free	smbd[8951]: #2 0x80168eaad <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Oct 3 13:04:20	stef-nas4free	smbd[8951]: #1 0x8035bb902 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Oct 3 13:04:20	stef-nas4free	smbd[8951]: #0 0x8035bba18 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Oct 3 13:04:20	stef-nas4free	smbd[8951]: BACKTRACE: 6 stack frames:
Oct 3 13:04:20	stef-nas4free	smbd[8951]: [2015/10/03 13:04:20.466567, 0] ../source3/lib/util.c:899(log_stack_trace)
Oct 3 13:04:20	stef-nas4free	smbd[8951]: PANIC (pid 8951): internal error
Oct 3 13:04:20	stef-nas4free	smbd[8951]: [2015/10/03 13:04:20.431011, 0] ../source3/lib/util.c:788(smb_panic_s3)
Oct 3 13:04:20	stef-nas4free	smbd[8951]: ===============================================================
Oct 3 13:04:20	stef-nas4free	smbd[8951]: [2015/10/03 13:04:20.430293, 0] ../lib/util/fault.c:81(fault_report)
Oct 3 13:04:20	stef-nas4free	smbd[8951]: Please read the Trouble-Shooting section of the Samba HOWTO
Oct 3 13:04:20	stef-nas4free	smbd[8951]: INTERNAL ERROR: Signal 11 in pid 8951 (4.2.4)
Oct 3 13:04:20	stef-nas4free	smbd[8951]: [2015/10/03 13:04:20.429393, 0] ../lib/util/fault.c:79(fault_report)
Oct 3 13:04:20	stef-nas4free	smbd[8951]: ===============================================================
Oct 3 13:04:20	stef-nas4free	smbd[8951]: [2015/10/03 13:04:20.428013, 0] ../lib/util/fault.c:78(fault_report)

Thanks for your great work & greets,
stef

[nicolap8]

No errors in logs except for these two:

Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 100.0.0.10.in-addr.arpa. (PTR) that's already in the list
Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 server.local. (Addr) that's already in the list

I have not yet upgraded from previuos version but here also I can see these two errors!
@Jack the strange IP is because is reversed!

Oct 3 10:41:23 freenas mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 28803DF8 10.1.168.192.in-addr.arpa. (PTR) that's already in the list
Oct 3 10:41:23 freenas mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 28803A74 freenas.local. (Addr) that's already in the list

[MikeMac]

I have NFS warning at 1855, see picture


After downgrade to 1810 the problem is varnished.



On top of it one Russian language user had reported his mediaplayer failed to connect to NAS on 1855. I, by the way, have connection with my Dune

PS My NFS settings at Services|NFS
Number of servers 2
NFSv4 - Disabled

[woser]

I Have the same problem with NFS as post above, but it rather works ok, but for me is worse problem please look into attachment.


This is a New Server with:

Supermicro X10DRH-C
32GB RAM DDR4 1600Mhz

8x4TB HGST HUS724040ALA640

ZFS with RAIDZ-2

When I use a NFS storage RAM is all time usage in 92%

[daoyama]

i still have some smb lib errors with this build - any suggestion how i can troubleshoot theese? They don't seem to affect anything right now.

Please post /var/etc/smb4.conf.
Try to remove all Auxiliary parameters in Services|CIFS/SMB|Settings and Services|CIFS/SMB|Shares.

[daoyama]

I have NFS warning at 1855, see picture

Thanks. It's fixed. This is not functional change. You can't see the IP address on the page only.
NFS should work correctly even if the warning is showed.
If you can't connect NFS server, it means your setting is wrong.

[spy0r]

i still have some smb lib errors with this build - any suggestion how i can troubleshoot theese? They don't seem to affect anything right now.

Please post /var/etc/smb4.conf.
Try to remove all Auxiliary parameters in Services|CIFS/SMB|Settings and Services|CIFS/SMB|Shares.

Code: Select all

[global]
server role = standalone
encrypt passwords = yes
netbios name = stef-nas4free
workgroup = WORKGROUP
server string = NAS4Free Server
security = user
max protocol = SMB3
dns proxy = no
# Settings to enhance performance:
strict locking = no
read raw = yes
write raw = yes
oplocks = yes
max xmit = 65535
deadtime = 15
getwd cache = yes
socket options = TCP_NODELAY SO_SNDBUF=128480 SO_RCVBUF=128480
# End of performance section
unix charset = UTF-8
large readwrite = no
store dos attributes = yes
local master = yes
domain master = yes
preferred master = yes
os level = 35
time server = yes
guest account = nobody
map to guest = Never
max log size = 100
syslog only = yes
syslog = 1
load printers = no
printing = bsd
printcap name = /dev/null
disable spoolss = yes
log level = 1
dos charset = CP437
smb passwd file = /var/etc/private/smbpasswd
private dir = /var/etc/private
passdb backend = tdbsam
idmap config * : backend = tdb
idmap config * : range = 10000-39999

i removed sendfile/asyncIO and am testing again...

[daoyama]

i still have some smb lib errors with this build - any suggestion how i can troubleshoot theese? They don't seem to affect anything right now.

Please post /var/etc/smb4.conf.
Try to remove all Auxiliary parameters in Services|CIFS/SMB|Settings and Services|CIFS/SMB|Shares.

Code: Select all

[global]
server role = standalone
encrypt passwords = yes
netbios name = stef-nas4free
workgroup = WORKGROUP
server string = NAS4Free Server
security = user
max protocol = SMB3
dns proxy = no
# Settings to enhance performance:
strict locking = no
read raw = yes
write raw = yes
oplocks = yes
max xmit = 65535
deadtime = 15
getwd cache = yes
socket options = TCP_NODELAY SO_SNDBUF=128480 SO_RCVBUF=128480
# End of performance section
unix charset = UTF-8
large readwrite = no
store dos attributes = yes
local master = yes
domain master = yes
preferred master = yes
os level = 35
time server = yes
guest account = nobody
map to guest = Never
max log size = 100
syslog only = yes
syslog = 1
load printers = no
printing = bsd
printcap name = /dev/null
disable spoolss = yes
log level = 1
dos charset = CP437
smb passwd file = /var/etc/private/smbpasswd
private dir = /var/etc/private
passdb backend = tdbsam
idmap config * : backend = tdb
idmap config * : range = 10000-39999

i removed sendfile/asyncIO and am testing again...

Please post all settings includes shares. I can't reproduce/confirm without all config.

[spy0r]

without sendfile an asyncIO there seem to be no more errors, i keep you updated with the whole config as the errors come back! Thanks

[Jack Foobar]

No errors in logs except for these two:

Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 100.0.0.10.in-addr.arpa. (PTR) that's already in the list
Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 server.local. (Addr) that's already in the list

I have not yet upgraded from previuos version but here also I can see these two errors!
@Jack the strange IP is because is reversed!

Oct 3 10:41:23 freenas mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 28803DF8 10.1.168.192.in-addr.arpa. (PTR) that's already in the list
Oct 3 10:41:23 freenas mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 28803A74 freenas.local. (Addr) that's already in the list

Thanks for verifying that Nicola. That's a very weird bug. Never had a Dns reverse an IP on me before.

[woser]

I Have the same problem with NFS as post above, but it rather works ok, but for me is worse problem please look into attachment.


This is a New Server with:

Supermicro X10DRH-C
32GB RAM DDR4 1600Mhz

8x4TB HGST HUS724040ALA640

ZFS with RAIDZ-2

When I use a NFS storage RAM is all time usage in 92%

Problem it's solved for me. Problem was iKVM when I use a LACP it must be off, another way we got a kernel panic. Nowtime it works stable. Thanks

[bafforosso]

No errors in logs except for these two:

Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801407180 100.0.0.10.in-addr.arpa. (PTR) that's already in the list
Oct 2 23:51:23 server mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 0000000801406D60 server.local. (Addr) that's already in the list

I have not yet upgraded from previuos version but here also I can see these two errors!
@Jack the strange IP is because is reversed!

Oct 3 10:41:23 freenas mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 28803DF8 10.1.168.192.in-addr.arpa. (PTR) that's already in the list
Oct 3 10:41:23 freenas mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 28803A74 freenas.local. (Addr) that's already in the list

Thanks for verifying that Nicola. That's a very weird bug. Never had a Dns reverse an IP on me before.

PTR record is Reverse DNS, see : What is a PTR record and how to add one?

Don't worry, this errors have been here for some time, ok they are errors but totally harmless as they are saying it's trying to add a record already present.

[Jack Foobar]

Works for me. If it ain't broke, I don't care. Thanks.