This is the old XigmaNAS forum in read only mode,
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
it will taken offline by the end of march 2021!
I like to aks Users and Admins to rewrite/take over important post from here into the new fresh main forum!
Its not possible for us to export from here and import it to the main forum!
Can't enable web access on OPT1
-
ssjoco
- NewUser
- Posts: 5
- Joined: 19 May 2015 23:14
- Status: Offline
Can't enable web access on OPT1
A have two subnet and two LAN card on NAS4free (tried on x64 and rpi2). I can ping both Ip but can't access the Web GUI on the OPT1 IP. I add the subnets in the General menu
-
daoyama
- Developer
- Posts: 394
- Joined: 25 Aug 2012 09:28
- Location: Japan
- Status: Offline
Re: Can't enable web access on OPT1
Not designed for OPT.ssjoco wrote:A have two subnet and two LAN card on NAS4free (tried on x64 and rpi2). I can ping both Ip but can't access the Web GUI on the OPT1 IP. I add the subnets in the General menu
WebGUI IP will get from LAN interface only.
NAS4Free 10.2.0.2.2115 (x64-embedded), 10.2.0.2.2258 (arm), 10.2.0.2.2258(dom0)
GIGABYTE 5YASV-RH, Celeron E3400 (Dual 2.6GHz), ECC 8GB, Intel ET/CT/82566DM (on-board), ZFS mirror (2TBx2)
ASRock E350M1/USB3, 16GB, Realtek 8111E (on-board), ZFS mirror (2TBx2)
MSI MS-9666, Core i7-860(Quad 2.8GHz/HT), 32GB, Mellanox ConnectX-2 EN/Intel 82578DM (on-board), ZFS mirror (3TBx2+L2ARC/ZIL:SSD128GB)
Develop/test environment:
VirtualBox 512MB VM, ESXi 512MB-8GB VM, Raspberry Pi, Pi2, ODROID-C1
GIGABYTE 5YASV-RH, Celeron E3400 (Dual 2.6GHz), ECC 8GB, Intel ET/CT/82566DM (on-board), ZFS mirror (2TBx2)
ASRock E350M1/USB3, 16GB, Realtek 8111E (on-board), ZFS mirror (2TBx2)
MSI MS-9666, Core i7-860(Quad 2.8GHz/HT), 32GB, Mellanox ConnectX-2 EN/Intel 82578DM (on-board), ZFS mirror (3TBx2+L2ARC/ZIL:SSD128GB)
Develop/test environment:
VirtualBox 512MB VM, ESXi 512MB-8GB VM, Raspberry Pi, Pi2, ODROID-C1
-
ssjoco
- NewUser
- Posts: 5
- Joined: 19 May 2015 23:14
- Status: Offline
Re: Can't enable web access on OPT1
It means NAS4Free WebGUI accessable with LAN IP address only.
-
mdsystems
- Starter
- Posts: 20
- Joined: 15 Oct 2015 11:08
- Status: Offline
Re: Can't enable web access on OPT1
Yes, but you can enable other networks in the general setup and route to your LAN, which should achieve what you are looking for. That's what I do, anyway.