[SOLVED] NAS4FREE 10.2.0.2.1906 crash my server

[Faucon_2001]

Hi,

I have been using Nas4Free for quite a while and have updated this weekend from 9.2 to 10.2.0.2.1906 (latest stable release)
Since then, every time that from the web browser I try to copy files from one folder to another, it works for a few files then my server freeze.
Same thing with SMB or SSH. It's not immediate but after 3-4 files copied, it crashes.
Crash only appears when I copy files using these services.
On the other hand my nightly backup script running RSYNC works well, and Torrent, DNLA/UPNP services are working correctly.

My 2 hard drives are brand new so I don't suspect any issue from that side, and smart report is clean.
My setup is a core2 duo, 2 Go ram, booting on an USB key (embeded) with 2X4To UFS drives

So, I have tried to downgrade to 9.2 which was working fine, but when I mount the disks it says that the partitions number are not correct!
Hard drive were reformated with 10.2 after the upgrade, so may be that the origin of the problem with 9.2

Can you help me ? I am lost.

[Faucon_2001]

I solved the issue by redoing the setup manually.
Previously I had imported the setup from 9.2 in 10.2 and it screwed up the whole system.
I don't know if there is an incompatibility issue or if the setup file from 9.2 was corrupted.

[daoyama]

Hello,

I solved the issue by redoing the setup manually.
Previously I had imported the setup from 9.2 in 10.2 and it screwed up the whole system.
I don't know if there is an incompatibility issue or if the setup file from 9.2 was corrupted.

Could you provide both good and bad config?
If possible, please contact by Private Message or directly mail to aoyama@freenas.org.