NAS4Free 10.2.0.2.1962 released (FreeBSD 10.2-RELEASE-P5)

[zoon01]

The nas4free team is pleased to announce the release of 10.2.0.2.1962

http://sourceforge.net/projects/nas4fre ... .0.2.1962/

Everyone can upgrade from NAS4Free version 9.3.0.2.1310 or Higher.

README & CHANGELOG

NAS4Free Upgrade from below 9.3.0.2.1310 is NOT possible!!!
=====================================================
Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
** ! Tools to write extracted embedded file are not supported ! **
You must use the liveusb/CD for it's first installation!!!.

Install from scratch notes
======================
** Embedded.img.xz is only for upgrades by WEBGUI, do not extract and write to any media! **

Download NAS4Free livecd or liveusb and boot from it.
The compressed LiveUSB.img.gz needs to be extracted before you can write it to usb media,
you can use it with Win32DiskImager or any other tool.
Press 9 for the install menu and perform an embedded installation.

Upgrade note:
============
You must associate CARP with physical interface explicitly after upgrading to 10.X.
You may need modifying your NFS and AFP share setting.
You may need modifying your ftp setting, no longer SSL is supported (only TLS).
Send Buffer Size/Receive Buffer Size in CIFS/SMB is changed to 128480 since 9.3.0.2.1375.
/var and /var/tmp size has changed.
After the upgrade please do make a new backup of your config System|Backup/Restore.

ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize.

Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 10.2.0.2.1962
=================
Changes:
- Upgrade to FreeBSD 10.2-RELEASE-P5.
- Add Mellanox ConnectX-2 EN driver module. (x64 only)
- Add Auxiliary parameters in Samba AD.
- Add bhyve and related files. (CLI only)
- Add hint.acpi_throttle.0.disabled="0", hint.p4tcc.0.disabled="0".
- Add dlna user and group.
- Add minidlna. (CLI only)
- Add VirtualBox with WebSocket VNC server. (x86 and x64 only)
- Add phpVirtualBox and noVNC(HTML5/WebSocket VNC client) for VM management.
- Add ability to mount exFAT disk.
- Add samba local group.
- Add ability to add tap device on bridge interface.
- Add console fonts and keymaps.
- Add keymap setting/restart WebGUI in console menu.
- Add quirk for Silicon Power 16GB and more.
- Add allow group when local users only mode on FTP service.
- Add RRDtool and related files.
- Add mapping DOS attributes on CIFS/SMB. (ON by default)
- Add various daemon/utility/debug tools for future development.
- Add hosts allow on console menu.
- Remove usesendfile on CIFS/SMB.
- Change ZFS pool info reflected from zpool list.
- Change Store DOS attributes to OFF by default.
- Upgrade bash 4.3 to patch 42.
- Upgrade lighttpd to 1.4.37.
- Upgrade samba to 4.2.4.
- Upgrade isboot to 0.2.11.
- Upgrade tzdata to 2015g.
- Upgrade php to 5.6.14.

Fixes:
- Fix NTFS is not detected on Import disks.
- Fix SSL certificate link. (ticket #239)
- Fix NFS share network. (ticket #238)
- Fix boot time ntpdate fail when AD DC enabled.
- Fix wrong path in Samba AD. (ticket #228, #232)
- Undefined symbol "av_find_stream_info" in fuppes/libmetadata_libavformat.so.
- AFP share is not advised.
- Fix webserver user logins.
- Fix wrong path ticket 228.

Note:
- iperf2 has been replaced for iperf3 because of inconsistent results for UDP above 2Gbps.
- iperf3 is not backwards compatible with iperf2.x.

Permanent restrictions:
- It is not possible to format a SoftRAID disk with MSDOS FAT16/32.
- It is not possible to encrypt a disk partition, only complete disks are supported.
- AFP shares with TimeMachine support are limited to max. 4 shares.

Regards,
The NAS4Free Team

[kkd]

hi
just upgraded, seems ok.
Thanks Devs

[spy0r]

upgraded my test platform right now, seems to be good - thanks!!!

[Jack Foobar]

This seems to be working without issue here. No errors except for the standard "mDNSResponderPosix: mDNS_Register_internal: ERROR!! Tried to register AuthRecord" that we've all grown to love.

nas.jpg

Although I do have a question. With this new integrated DLNA/UPNP set up(working set up), would there happen to be any updated instructions for setting this up properly. I see bits and pieces from users, but nothing coherent. Do I need to configure the 49152 port admin page after the initial set up of the database, and if so where are the faq's on that. Just a side issue, and nothing to do with the stability of the build.

Oh, and the cpu load seems to be working fine in this revision. It registers on the summary page and the graphing page. Thanks for your work.

[CrashEr]

After upgrading embedded from previous version and reboot, i got this message in system log:
lighttpd[2231]: (chunk.c.480) denying upload as writing to file failed: /var/tmp/ftmp/lighttpd-upload-OjoxKm No space left on device
What could it be?
Thanks/

[alexey123]

Hello all!
I make upgrade home server - all work.
But I can not find library libidn.so.11 - it was into /usr/local/lib folder . Where is it ? I use this library for dnsmasq extension.
Can you add it, or I need add library with extension ?

[daoyama]

But I can not find library libidn.so.11 - it was into /usr/local/lib folder . Where is it ? I use this library for dnsmasq extension.
Can you add it, or I need add library with extension ?

It seems that port option is accidentally changed since 1805.
Fixed at 1975. Thanks.

[lux]

Upgraded my Home NAS works like a charm!

Thx Dev's!

[K1m0n]

I Successfully upgraded my ss-4200 box to *.1962, x86, embedded.
All seemed ok, and then (after a few days running) i got the following error in Diagnostics/Log:

Code: Select all

Oct 31 01:48:26 	storage 	smbd[3174]: [2015/10/31 01:48:26.230523, 0] ../lib/util/fault.c:78(fault_report)
Oct 31 01:48:26 	storage 	smbd[3174]: ===============================================================
Oct 31 01:48:26 	storage 	smbd[3174]: [2015/10/31 01:48:26.230964, 0] ../lib/util/fault.c:79(fault_report)
Oct 31 01:48:26 	storage 	smbd[3174]: INTERNAL ERROR: Signal 11 in pid 3174 (4.2.4)
Oct 31 01:48:26 	storage 	smbd[3174]: Please read the Trouble-Shooting section of the Samba HOWTO
Oct 31 01:48:26 	storage 	smbd[3174]: [2015/10/31 01:48:26.231026, 0] ../lib/util/fault.c:81(fault_report)
Oct 31 01:48:26 	storage 	smbd[3174]: ===============================================================
Oct 31 01:48:26 	storage 	smbd[3174]: [2015/10/31 01:48:26.231078, 0] ../source3/lib/util.c:788(smb_panic_s3)
Oct 31 01:48:26 	storage 	smbd[3174]: PANIC (pid 3174): internal error
Oct 31 01:48:26 	storage 	smbd[3174]: [2015/10/31 01:48:26.233522, 0] ../source3/lib/util.c:899(log_stack_trace)
Oct 31 01:48:26 	storage 	smbd[3174]: BACKTRACE: 0 stack frames:
Oct 31 01:48:26 	storage 	smbd[3174]: [2015/10/31 01:48:26.234107, 0] ../source3/lib/dumpcore.c:313(dump_core)
Oct 31 01:48:26 	storage 	smbd[3174]: unable to change to %N.core
Oct 31 01:48:26 	storage 	smbd[3174]: refusing to dump core

The only uncommon setting I use on samba is:

Code: Select all

wins support = yes

The box continues to run fine.
Any suggestions on steps needed for further troubleshooting/reporting?
my understanding of posix systems is rather limited.

[tbusquet]

Since using version 10.2.x.x I've encountered a kernel panic everytime I modify a service and click on "save and restart".

I've been using Nas4free ever since it came out after the "breakup" with FreeNAS.

My config is as follows:

Asus P7P55D-E
i5 750 Quadcore cpu
8GB of DDR3
3x Intel CT desktop 1Gbs network adaptor with LACP config connected to Cisco SLM2008 also on LACP.
3 ZFS pools:
5x 3TB WD disc's connected to the onboard intel connectors
5x 2TB WD disc's connected to an Intel based SAS controller with a LSI 1068E chip.
3x 1,5TB+2x2TB partially on the LSI1068 and partially on the onboard Marvell 88SE912.
All pools are configured as RAID-Z1.

I'm running an embedded x64 version on an OCZ Vertex2 60GB SDD, it has a Data and a Swap partition and is connected to the onboard Intel sata controller.

I made photo of the panic but I can't save the log to disk since I'm running an embedded version.

[daoyama]

Since using version 10.2.x.x I've encountered a kernel panic everytime I modify a service and click on "save and restart".

Your image looks fault on lagg device. I don't know this is caused by LACP.
Try to use failover instead of LACP. Then, try to remove lagg.

[raulfg3]

If you upgrade from previous version try to do a fresh installl and configure all by hand ( do not use previosly saved config) to discard problems from a old config.xml file

[tbusquet]

If you upgrade from previous version try to do a fresh installl and configure all by hand ( do not use previosly saved config) to discard problems from a old config.xml file

Since using version 10.2.x.x I've encountered a kernel panic everytime I modify a service and click on "save and restart".

Your image looks falut on lagg device. I don't know this is caused by LACP.
Try to use failover instead of LACP. Then, try to remove lagg.

I did a fresh install many times.

Anyways, I removed the lagg device and am now running on a single NIC, this seems to resolve the panics! I'm curious why this happens though. Lagg was stable with lacp on the previous distributions.

[spy0r]

Okay, it's me again with my smb lib errors... this time on this build (but the past tells me, it's in every build so far with my config/hardware):

Code: Select all

Nov  8 19:47:34 stef-nas4free smbd[57657]:   refusing to dump core
Nov  8 19:47:34 stef-nas4free smbd[57657]:   unable to change to %N.core
Nov  8 19:47:34 stef-nas4free smbd[57657]: [2015/11/08 19:47:34.679452,  0] ../source3/lib/dumpcore.c:313(dump_core)
Nov  8 19:47:34 stef-nas4free smbd[57657]:    #5 0x80145c1a8 <pthread_getspecific+0xdd8> at /lib/libthr.so.3
Nov  8 19:47:34 stef-nas4free smbd[57657]:    #4 0x80145c9aa <pthread_sigmask+0x4aa> at /lib/libthr.so.3
Nov  8 19:47:34 stef-nas4free smbd[57657]:    #3 0x80168e977 <fault_setup+0x157> at /usr/local/lib/libsamba-util.so.0
Nov  8 19:47:34 stef-nas4free smbd[57657]:    #2 0x80168eacd <smb_panic+0x13d> at /usr/local/lib/libsamba-util.so.0
Nov  8 19:47:34 stef-nas4free smbd[57657]:    #1 0x8035ba802 <smb_panic_s3+0x52> at /usr/local/lib/libsmbconf.so.0
Nov  8 19:47:34 stef-nas4free smbd[57657]:    #0 0x8035ba918 <log_stack_trace+0x28> at /usr/local/lib/libsmbconf.so.0
Nov  8 19:47:34 stef-nas4free smbd[57657]:   BACKTRACE: 6 stack frames:
Nov  8 19:47:34 stef-nas4free smbd[57657]: [2015/11/08 19:47:34.673611,  0] ../source3/lib/util.c:899(log_stack_trace)
Nov  8 19:47:34 stef-nas4free smbd[57657]:   PANIC (pid 57657): internal error
Nov  8 19:47:34 stef-nas4free smbd[57657]: [2015/11/08 19:47:34.631407,  0] ../source3/lib/util.c:788(smb_panic_s3)
Nov  8 19:47:34 stef-nas4free smbd[57657]:   ===============================================================
Nov  8 19:47:34 stef-nas4free smbd[57657]: [2015/11/08 19:47:34.630725,  0] ../lib/util/fault.c:81(fault_report)
Nov  8 19:47:34 stef-nas4free smbd[57657]:   Please read the Trouble-Shooting section of the Samba HOWTO
Nov  8 19:47:34 stef-nas4free smbd[57657]:   INTERNAL ERROR: Signal 11 in pid 57657 (4.2.4)
Nov  8 19:47:34 stef-nas4free smbd[57657]: [2015/11/08 19:47:34.629771,  0] ../lib/util/fault.c:79(fault_report)
Nov  8 19:47:34 stef-nas4free smbd[57657]:   ===============================================================
Nov  8 19:47:34 stef-nas4free smbd[57657]: [2015/11/08 19:47:34.628134,  0] ../lib/util/fault.c:78(fault_report)

And my smb4.conf:

Code: Select all

[global]
server role = standalone
encrypt passwords = yes
netbios name = stef-nas4free
workgroup = WORKGROUP
server string = NAS4Free Server
security = user
max protocol = SMB3
dns proxy = no
# Settings to enhance performance:
strict locking = no
read raw = yes
write raw = yes
oplocks = yes
max xmit = 65535
deadtime = 15
getwd cache = yes
socket options = TCP_NODELAY SO_SNDBUF=128480 SO_RCVBUF=128480 
# End of performance section
unix charset = UTF-8
large readwrite = no
store dos attributes = yes
local master = yes
domain master = yes
preferred master = yes
os level = 35
time server = yes
guest account = ftp
map to guest = Never
max log size = 100
syslog only = yes
syslog = 1
load printers = no
printing = bsd
printcap cache time = 0
printcap name = /dev/null
disable spoolss = yes
log level = 1
dos charset = CP437
smb passwd file = /var/etc/private/smbpasswd
private dir = /var/etc/private
passdb backend = tdbsam
idmap config * : backend = tdb
idmap config * : range = 10000-39999

[bilder]
comment = bilder
path = /mnt/zfs_raid_pool/bilder
writeable = yes
printable = no
veto files = /.snap/.sujournal/
hide dot files = yes
guest ok = no
inherit permissions = yes
inherit acls = yes
vfs objects = shadow_copy2 zfsacl aio_pthread 
nfs4:mode = special
nfs4:acedup = merge
nfs4:chown = yes
shadow:format = auto-%Y%m%d-%H%M%S
shadow:snapdir = .zfs/snapshot
shadow:sort = desc
shadow:localtime = yes
veto files = /.zfs/

[dokumente]
comment = dokumente
path = /mnt/zfs_raid_pool/dokumente
writeable = yes
printable = no
veto files = /.snap/.sujournal/
hide dot files = yes
guest ok = no
inherit permissions = yes
inherit acls = yes
vfs objects = shadow_copy2 zfsacl recycle aio_pthread 
nfs4:mode = special
nfs4:acedup = merge
nfs4:chown = yes
recycle:repository = .recycle/%U
recycle:keeptree = yes
recycle:versions = yes
recycle:touch = yes
recycle:directory_mode = 0777
recycle:subdir_mode = 0700
shadow:format = auto-%Y%m%d-%H%M%S
shadow:snapdir = .zfs/snapshot
shadow:sort = desc
shadow:localtime = yes
veto files = /.zfs/

[musik]
comment = musik
path = /mnt/zfs_raid_pool/musik
writeable = yes
printable = no
veto files = /.snap/.sujournal/
hide dot files = yes
guest ok = no
inherit permissions = yes
inherit acls = yes
vfs objects = shadow_copy2 zfsacl aio_pthread 
nfs4:mode = special
nfs4:acedup = merge
nfs4:chown = yes
shadow:format = auto-%Y%m%d-%H%M%S
shadow:snapdir = .zfs/snapshot
shadow:sort = desc
shadow:localtime = yes
veto files = /.zfs/

[nina]
comment = nina
path = /mnt/zfs_raid_pool/nina
writeable = yes
printable = no
veto files = /.snap/.sujournal/
hide dot files = yes
guest ok = no
inherit permissions = yes
inherit acls = yes
vfs objects = shadow_copy2 zfsacl recycle aio_pthread 
nfs4:mode = special
nfs4:acedup = merge
nfs4:chown = yes
recycle:repository = .recycle/%U
recycle:keeptree = yes
recycle:versions = yes
recycle:touch = yes
recycle:directory_mode = 0777
recycle:subdir_mode = 0700
shadow:format = auto-%Y%m%d-%H%M%S
shadow:snapdir = .zfs/snapshot
shadow:sort = desc
shadow:localtime = yes
veto files = /.zfs/

[software]
comment = software
path = /mnt/zfs_raid_pool/software
writeable = yes
printable = no
veto files = /.snap/.sujournal/
hide dot files = yes
guest ok = no
inherit permissions = yes
inherit acls = yes
vfs objects = shadow_copy2 zfsacl aio_pthread 
nfs4:mode = special
nfs4:acedup = merge
nfs4:chown = yes
shadow:format = auto-%Y%m%d-%H%M%S
shadow:snapdir = .zfs/snapshot
shadow:sort = desc
shadow:localtime = yes
veto files = /.zfs/

[stef]
comment = stef
path = /mnt/zfs_raid_pool/stef
writeable = yes
printable = no
veto files = /.snap/.sujournal/
hide dot files = yes
guest ok = no
inherit permissions = yes
inherit acls = yes
vfs objects = shadow_copy2 zfsacl recycle aio_pthread 
nfs4:mode = special
nfs4:acedup = merge
nfs4:chown = yes
recycle:repository = .recycle/%U
recycle:keeptree = yes
recycle:versions = yes
recycle:touch = yes
recycle:directory_mode = 0777
recycle:subdir_mode = 0700
shadow:format = auto-%Y%m%d-%H%M%S
shadow:snapdir = .zfs/snapshot
shadow:sort = desc
shadow:localtime = yes
veto files = /.zfs/

[videos]
comment = videos
path = /mnt/zfs_raid_pool/videos
writeable = yes
printable = no
veto files = /.snap/.sujournal/
hide dot files = yes
guest ok = no
inherit permissions = yes
inherit acls = yes
vfs objects = shadow_copy2 zfsacl aio_pthread 
nfs4:mode = special
nfs4:acedup = merge
nfs4:chown = yes
shadow:format = auto-%Y%m%d-%H%M%S
shadow:snapdir = .zfs/snapshot
shadow:sort = desc
shadow:localtime = yes
veto files = /.zfs/

Thanks for advices!
stef

[spy0r]

Does anyone care about it or am i the only one with these errors and have to deal with it on my own?

As i said, i have these errors in every 10.* build - sooner or later!

Greets

[Andrey_BAM]

Does anyone care about it or am i the only one with these errors and have to deal with it on my own?

As i said, i have these errors in every 10.* build - sooner or later!

Greets

I use NT1 no errors. windows 10, windows 8.1, windows 7 copy large files without error.

[raulfg3]

Does anyone care about it or am i the only one with these errors and have to deal with it on my own?

As i said, i have these errors in every 10.* build - sooner or later!

Greets

Do you do a update?.

If yes please try to do a fresh install, errors shows is like your SAMBA are a mix (SMB3 & 4), so a new reinstall solve it.


PD: save your actual config.xml file and restre it once you do the reinstall to recover all of your actual config ( shares/services,etc...)

[spy0r]

Yeah i didn't do a fresh install since 9.3, i always upgraded.
I thought upgrading overwrites the whole system files so i had no idea that this could affect something.

Thanks for the hint, i will give it a try maybe at the weekend.

[spy0r]

I did a clean/fresh install from scratch this sunday from 10.2.0.2.2003 live USB and restored my config, everything works fine so far.

If the smb/lib errors come back, i will report that in the rev.2003 thread!

Thanks!