NAS4Free 10.2.0.2.2067 released (FreeBSD 10.2-RELEASE-P7)

[zoon01]

The nas4free team is pleased to announce the release of 10.2.0.2.2067

http://sourceforge.net/projects/nas4fre ... .0.2.2067/

Everyone can upgrade from NAS4Free version 9.3.0.2.1310 or Higher.

README & CHANGELOG

NAS4Free Upgrade from below 9.3.0.2.1310 is NOT possible!!!
=====================================================
Upgrading NAS4Free "Embedded" or "Full" from any version below 9.3.0.2.1310 by webgui or from
LiveCD/USB is problematic, due a new size of boot partition & partition layout.
Please download and save your NAS4Free config to a safe place and backup all files from second
partition if you use boot disk as data disk.
INSTALL FROM SCRATCH IS THE ONLY WAY!
After installation you can restore your config.
Sorry for inconvenience.
** ! Tools to write extracted embedded file are not supported ! **
You must use the liveusb/CD for it's first installation!!!.

Install from scratch notes
======================
** Embedded.img.xz is only for upgrades by WEBGUI, do not extract and write to any media! **

Download NAS4Free livecd or liveusb and boot from it.
The compressed LiveUSB.img.gz needs to be extracted before you can write it to usb media,
you can use it with Win32DiskImager or any other tool.
Press 9 for the install menu and perform an embedded installation.

Upgrade note:
============
You must associate CARP with physical interface explicitly after upgrading to 10.X.
You may need modifying your NFS and AFP share setting.
You may need modifying your ftp setting, no longer SSL is supported (only TLS).
Send Buffer Size/Receive Buffer Size in CIFS/SMB is changed to 128480 since 9.3.0.2.1375.
/var and /var/tmp size has changed.
After the upgrade please do make a new backup of your config System|Backup/Restore.

ZFS User note!
After upgrading, you must re-sync ZFS configuration from Disks|ZFS|Configuration|Synchronize.

Requirements
============
Embedded: 2GB CF/USB/SSD (NAS4free "Embedded" is Recommended Install)
Full: 4GB HDD/SSD (For developers and some advanced users, Not Recommended!)
Swap less: physical memory 2GB or higher needed.
With swap: physical memory 512MB + swap 512MB (swap 1024MB recommended).

*Note: LiveCD is not supported on swap mode except installation and upgrading.

BUILD 10.2.0.2.2067
=================
Changes:
- Upgrade to FreeBSD 10.2-RELEASE-P7.
- Add Mellanox ConnectX-2 EN driver module. (x64 only)
- Add Auxiliary parameters in Samba AD.
- Add bhyve and related files. (CLI only)
- Add hint.acpi_throttle.0.disabled="0", hint.p4tcc.0.disabled="0".
- Add dlna user and group.
- Add minidlna with WebGUI.
- Add VirtualBox with WebSocket VNC server. (x86 and x64 only)
- Add phpVirtualBox and noVNC(HTML5/WebSocket VNC client) for VM management.
- Add ability to mount exFAT disk.
- Add samba local group.
- Add ability to add tap device on bridge interface.
- Add console fonts and keymaps.
- Add keymap setting/restart WebGUI in console menu.
- Add quirk for Silicon Power 16GB and more.
- Add allow group when local users only mode on FTP service.
- Add RRDtool and related files.
- Add mapping DOS attributes on CIFS/SMB. (OFF by default)
- Add various daemon/utility/debug tools for future development.
- Add hosts allow on console menu.
- Add autoresize on SD image. (ARM only)
- Add sendmail_path to php.ini to use mail() function.
- Add auto start/stop VM. (virtualbox)
- Add syncthing and related user and group.
- Remove usesendfile on CIFS/SMB.
- Remove legacy disk aliases such as /dev/ad0.
- Change DSA private key to RSA private key on SSH service.
- Change ZFS pool info reflected from zpool list.
- Change Store DOS attributes to OFF by default.
- Upgrade bash 4.3 to patch 42.
- Upgrade lighttpd to 1.4.37.
- Upgrade isboot to 0.2.13.
- Upgrade tzdata to 2015g.
- Upgrade mDNSResponder to 576.30.4.
- Upgrade php to 5.6.15.
- Upgrade samba to 4.2.5.
- Upgrade dmidecode to 3.0.
- Upgrade iperf3 to 3.1.
- Upgrade nano to 2.4.3.

Fixes:
- Fix smbclient use NT1 instead of SMB3/SMB2. (ticket #236)
- Fix cannot execute samba if time server is empty.
- Fix missing loader parameters on fresh installation. (full only)
- Fix NTFS is not detected on Import disks.
- Fix SSL certificate link. (ticket #239)
- Fix NFS share network. (ticket #238)
- Fix boot time ntpdate fail when AD DC enabled.
- Fix wrong path in Samba AD. (ticket #228, #232)
- Undefined symbol "av_find_stream_info" in fuppes/libmetadata_libavformat.so.
- AFP share is not advised.
- Fix webserver user logins.
- Fix wrong path ticket 228.

Note:
- iperf2 has been replaced for iperf3 because of inconsistent results for UDP above 2Gbps.
- iperf3 is not backwards compatible with iperf2.x.

Permanent restrictions:
- It is not possible to format a SoftRAID disk with MSDOS FAT16/32.
- It is not possible to encrypt a disk partition, only complete disks are supported.
- AFP shares with TimeMachine support are limited to max. 4 shares.

Note for new users:
===================

**** The default login for NAS4Free WEBGUI ****

username: admin
password: nas4free

- Change those defaults after setup!

**** phpVitualBox's default login ****

username: admin
password: admin

- Change those default passwords after setup!

wiki virtualbox
http://wiki.nas4free.org/doku.php?id=do ... virtualbox



Regards,
The NAS4Free Team

[crowi]

Just upgraded the first machine, works nice.
As always: Great Job!

Thanks for adding MIniDLNA to the webgui, that was a long awaited feature!

[jamaroney]

Is it possible with future upgrades to list ONLY those features that have changed since the previous version? Most of the the changes listed above are from previous firmware versions.

[noclaf]

Is it possible with future upgrades to list ONLY those features that have changed since the previous version? Most of the the changes listed above are from previous firmware versions.

Forget about it. Me & few others raised that request during few releases of 9.3 of we were told to f_* off (not literally) and look into commit browser (which is really not containg lots of other not_so_important changes).
----
like here viewtopic.php?f=78&t=8051&p=48188&hilit ... log#p48188

[kenZ71]

For those really curious why not copy / paste the original text above from current & prior release into windif?

[apollo567]

Is it possible with future upgrades to list ONLY those features that have changed since the previous version? Most of the the changes listed above are from previous firmware versions.

Well, have a look here please

http://sourceforge.net/p/nas4free/code/commit_browser

[alexey123]

Something wrong with Syncthing

I define folder and push Save and restart button. Syncthing build config, but not started - webgui was not accessable, sockets not opened
Then I push Save and restart - and service begin to run fine.
May be need use "Apply" ?

x86-embedded on Intel(R) Atom(TM) CPU D2500

[alex]

Is there problems with CIFS/SMB ? No access to share after upgrade to 2067. SMB is running, but permissions error

[raulfg3]

Is there problems with CIFS/SMB ? No access to share after upgrade to 2067. SMB is running, but permissions error

revise your settings, must have SMB2 or SMB3, not NT1

[kkd]

Is there problems with CIFS/SMB ? No access to share after upgrade to 2067. SMB is running, but permissions error

try to reboot the clients (SMB3 feature)

[slaycock]

Upgrade using NAS4Free-x64-embedded-10.2.0.2.2067.img seems to have failed.

On rebooting I get

No /boot/loader

FreeBSD/x86 boot
Default: 0:ad(0,a)/boot/kernel/kernel
Boot:
No /boot/kernel/kernel

FreeBSD/ x86 boot
Default: 0:ad(0,a)/boot/kernel/kernel
boot:

My NAS for Free instalation is on a USB stick.

[daoyama]

I define folder and push Save and restart button. Syncthing build config, but not started - webgui was not accessable, sockets not opened
Then I push Save and restart - and service begin to run fine.

Initial startup is very slow since it must create encryption key at first boot. (especially CPU is slow clock.)
You need wait for few secs before opening GUI.
I forgot to mention it.

[alexey123]

Initial startup is very slow since it must create encryption key at first boot. (especially CPU is slow clock.)
You need wait for few secs before opening GUI.
I forgot to mention it.

Also Syncthing give permissions for his folders as 700, and owner as syncthing. So as result , mtdiafiles is not readable by another Unix users, such samba or dlna.

Also please remove /usr/local/etc/minidlna.conf.sample and /usr/local/etc/rc.d/minidlna

[daoyama]

Also Syncthing give permissions for his folders as 700, and owner as syncthing.

What directory do you say? If you say about Home directory at NAS4Free WebGUI, it must use 700 for encryption keys.
You must create own folder for sharing and add it to Syncthing GUI.

[alexey123]

What directory do you say? If you say about Home directory at NAS4Free WebGUI, it must use 700 for encryption keys.
You must create own folder for sharing and add it to Syncthing GUI.

May be I do anything wrong ? I'm first time see this service.
I make syncro between NAS4Free and my mobile. Server was ask create folder for store media, named as gts7508i

It have permisiions for syncthing user only

[daoyama]

I make syncro between NAS4Free and my mobile. Server was ask create folder for store media, named as gts7508i

It have permisiions for syncthing user only

I think it is not related to NAS4Free. What permission is used for child directory (browser-images etc)?

[alexey123]

I think it is not related to NAS4Free.

I agree .

What permission is used for child directory (browser-images etc)?

Permissions for child folders and files is OK: folders 755, files 644

Maximum I'll make script for change permissions automatically

[Jack Foobar]

Upgrade using NAS4Free-x64-embedded-10.2.0.2.2067.img seems to have failed.
On rebooting I get
No /boot/loader
FreeBSD/x86 boot
Default: 0:ad(0,a)/boot/kernel/kernel
Boot:
No /boot/kernel/kernel
FreeBSD/ x86 boot
Default: 0:ad(0,a)/boot/kernel/kernel
boot:
My NAS for Free instalation is on a USB stick.

Unless my linux to freebsd translation is wrong, that looks like the wrong device ID. Isn't usb /dev/da1 or something of that sort? Luckily you can just reimage the usb stick, since it's an img file. Rufus or dd away and try again and let us know if it's the crap usb stick or the config is off.

And(topic shift) my upgrade went fine on an old SSD, but CIFS started getting chatty with

"nmbd[83726]: query_name_response: Multiple (2) responses received for a query on subnet",

so I had to slap it in the face and bind 139 with this in aux parameters:

bind interfaces only = YES
interfaces = x.x.x.x
smb ports = 139

Now it's shut up. Which is nice. In any case, let us know how the usb stick goes.

stuff.jpg

[kkd]

just upgraded. smb is perfect

[slaycock]

Unless my linux to freebsd translation is wrong, that looks like the wrong device ID. Isn't usb /dev/da1 or something of that sort? Luckily you can just reimage the usb stick, since it's an img file. Rufus or dd away and try again and let us know if it's the crap usb stick or the config is off.

I reinstalled using a live CD and all was OK after restoring the config file.

A second NAS4Free server which uses a IDE based CF upgraded without problems using the same img file that caused problems above.

[Jack Foobar]

Unless my linux to freebsd translation is wrong, that looks like the wrong device ID. Isn't usb /dev/da1 or something of that sort? Luckily you can just reimage the usb stick, since it's an img file. Rufus or dd away and try again and let us know if it's the crap usb stick or the config is off.

I reinstalled using a live CD and all was OK after restoring the config file.

A second NAS4Free server which uses a IDE based CF upgraded without problems using the same img file that caused problems above.

Thanks. Just a hiccup then.

[carloskar]

Upgraded from 1814 and almost everything works, yay for minidlna! =)

But ataidle and smartd services are not started after boot...

Edit: Never mind, it is most likely my fault. I'll investigate further.

[kfnas]

I'm on this 2067 release now. Thanks to devs!

but... what have been change regarding UFS / umask in this release?

I'm going to abadon the UFS alon disks and have to migrate them to zfs since:

issue:

Code: Select all

- mounted with acls support (ufs, local, journaled soft-updates, acls)
- directory owned by user:group with 770 permissions
 - acl	getfacl /mnt/UFSTEST/test
	# file: /mnt/UFSTEST/test
	# owner: user
	# group: group
	user::rwx
	group::rwx              # effective: ---
	group:TEST:r-x         # effective: ---
	group:TEST1:rwx              # effective: ---
	group:TEST2:rwx               # effective: ---
	mask::---
	other::---

logged in with user test who is participating in any of the TEST1-3 group
have no access via shell... ofcourse nor samba

weird