User Tools

Site Tools


This is an old revision of the document!

Disks|Management|iSCSI Initiator

This page shows your iSCSI volumes you are connected to, and add other iSCSI connections.

This is for your connections to volumes that another machine is exporting via iSCSI. Not for exporting your own volumes. That is done in the iSCSI Target service.

Disks|Management|iSCSI Initiator|Add

Here, you can add targets to connect to. You will need:

  • Name (for your reference, not used for connection)
  • Initiator name
  • Target name
  • Target Address (IP or DNS name of the machine hosting the target)
documentation/setup_and_user_guide/iscsi_initiator.1455874433.txt.gz · Last modified: 2018/07/08 17:48 (external edit)