User Tools

Site Tools


documentation:setup_and_user_guide:network_interface_lan

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
documentation:setup_and_user_guide:network_interface_lan [2018/09/30 22:53]
zoon01
documentation:setup_and_user_guide:network_interface_lan [2018/09/30 22:53] (current)
zoon01
Line 41: Line 41:
 OPT1 is the default name of the interface, and this can be customized. Once OPT1 is configured you will notice an additional level under Interfaces (assign) called OPT1. OPT1 is the default name of the interface, and this can be customized. Once OPT1 is configured you will notice an additional level under Interfaces (assign) called OPT1.
  
-Click Save and reboot XigmaNAS to ensure the additional interface is recognised. You can reboot NAS4Free via the Diagnostics/Reboot System page.+Click Save and reboot XigmaNAS to ensure the additional interface is recognised. You can reboot XigmaNAS via the Diagnostics/Reboot System page.
  
 Once XigmaNAS is again operational, you can configure the OPT1 interface and rename it to something more relevant to your network. Once XigmaNAS is again operational, you can configure the OPT1 interface and rename it to something more relevant to your network.
documentation/setup_and_user_guide/network_interface_lan.1538340804.txt.bz2 ยท Last modified: 2018/09/30 22:53 by zoon01