User Tools

Site Tools


faq:0001

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
faq:0001 [2018/07/12 02:25]
zoon01
faq:0001 [2018/08/10 21:56] (current)
zoon01
Line 7: Line 7:
  
   - Backup your configuration file.   - Backup your configuration file.
-  - Run fsck from WebGUI Tab> **Disks|Mount Point|Fsck**. //Make sure you select// "**Unmount disk/partition**", //read and understand all notes and warnings on this Tab//.+  - Run fsck from WebGUI Tab> **Disks Mount Point Fsck**. //Make sure you select// "**Unmount disk/partition**", //read and understand all notes and warnings on this Tab//.
   - Note or copy / paste any output for future reference.   - Note or copy / paste any output for future reference.
   - If you see " **FILE SYSTEM CLEAN** " then you are done, file system corruption should now be fixed, try to mount and use your file system again.   - If you see " **FILE SYSTEM CLEAN** " then you are done, file system corruption should now be fixed, try to mount and use your file system again.
Line 20: Line 20:
   - Add your disks carefully, make sure you specify how they are already formatted. __Under no circumstances should you reformat your disks__.   - Add your disks carefully, make sure you specify how they are already formatted. __Under no circumstances should you reformat your disks__.
   - __Do not__ mount any file systems.   - __Do not__ mount any file systems.
-  - If you //do not// have a RAID array, then from WebGUI Tab> **Advanced|Command** run:<code bash>fsck_ufs -p /dev/YourDrivep1 &</code>+  - If you //do not// have a RAID array, then from WebGUI Tab> **Tools > Execute Command** run:<code bash>fsck_ufs -p /dev/YourDrivep1 &</code>
   - Do this until you see "FILE SYSTEM CLEAN; SKIPPING CHECKS".   - Do this until you see "FILE SYSTEM CLEAN; SKIPPING CHECKS".
-  * **If you have a RAID5 array**, recreate your array, giving it the original name and the original disks, in the original order, __do not__ check the "Create & initialize" box, then from WebGUI Tab> **Advanced|Command** run:<code bash> fsck_ufs -p /dev/raid5/YourRAIDNamep1 &</code>+  * **If you have a RAID5 array**, recreate your array, giving it the original name and the original disks, in the original order, __do not__ check the "Create & initialize" box, then from WebGUI Tab> **Tools > Execute Command** run:<code bash> fsck_ufs -p /dev/raid5/YourRAIDNamep1 &</code>
   * Do this until you see "FILE SYSTEM CLEAN; SKIPPING CHECKS".   * Do this until you see "FILE SYSTEM CLEAN; SKIPPING CHECKS".
-  * **If you have a RAID1 array**, recreate your array, giving it the original name and the original disks, in the original order, __do not__ check the "Create & initialize" box, then from WebGUI Tab> **Advanced|Command** run:<code bash> fsck_ufs -p /dev/gmirror/YourRAIDNamep1 &</code>+  * **If you have a RAID1 array**, recreate your array, giving it the original name and the original disks, in the original order, __do not__ check the "Create & initialize" box, then from WebGUI Tab> **Tools > Execute Command** run:<code bash> fsck_ufs -p /dev/gmirror/YourRAIDNamep1 &</code>
   * Do this until you see "FILE SYSTEM CLEAN; SKIPPING CHECKS".   * Do this until you see "FILE SYSTEM CLEAN; SKIPPING CHECKS".
  
faq/0001.1531355104.txt.gz ยท Last modified: 2018/07/12 02:25 by zoon01